70ZV(@X0 0 0 kDٱBd, GvSmq}!mFx4C[9ANw3D@$Tq0JQJ!d1Ùt #rigger type * @rsvd1: Reserved * @size: Buffer size * @rsvd2: Reserved * @trigger_data: Trigger specific data * @rsvd3: Reserved * @rsvd4: Reserved */ struct mpi3mr_hdb_entry { __u8 buf_type; __u8 status; __u8 trigger_type; __u8 rsvd1; __u16 size; __u16 rsvd2; __u64 trigger_data; __u32 rsvd3; __u32 rsvd4; }; /** * struct mpi3mr_bsg_in_hdb_status - This structure contains * return data, IPCTNL_MSG_EXP_MAX }; enum ctattr_type { CTA_UNSPEC, CTA_TUPLE_ORIG, CTA_TUPLE_REPLY, CTA_STATUS, CTA_PROTOINFO, CTA_HELP, CTA_NAT_SRC, #define CTA_NAT CTA_NAT_SRC /* backwards compatibility */ CTA_TIMEOUT, CTA_MARK, CTA_COUNTERS_ORIG, CTA_COUNTERS_REPLY, CTA_USE, CTA_ID, CTA_NAT_DST, CTA_TUPLE_MASTER, CTA_SEQ_ADJ_ORIG, CTA_NAT_SEQ_ADJ_ORIG = CTA_SEQ_ADJ_ORIG, CTA_SEQ_ADJ_REPLY, CTA_NAT_SEQ_ADJ_REPLY = CTA_SEQ_ADJ_REPLY, CTA_SECMARK, /* obsolete */ CTA_ZONE, CTA_SECCTX, CTA_TIMESTAMP, CTA_MARK_MASK, */ /* ignore received CF frames which */ /* timestamps differ less than val */ #define CAN_ISOTP_LL_OPTS 5 /* pass struct can_isotp_ll_options */ struct can_isotp_options { __u32 flags; /* set flags for isotp behaviour. */ /* __u32 value : flags see below */ __u32 frame_txtime; /* frame transmission time (N_As/N_Ar) */ /* __u32 value : time in nano secs */ __u8 ext_address; /* set address for extended addressing */ /* __u8 value : extended address */ __u8 txpad_content; /* set content of paddinlinux/types.h> #define IP6T_OPTS_OPTSNR 16 struct ip6t_opts { __u32 hdrlen; /* Header Length */ __u8 flags; /* */ __u8 invflags; /* Inverse flags */ __u16 opts[IP6T_OPTS_OPTSNR]; /* opts */ __u8 optsnr; /* Nr of OPts */ }; #define IP6T_OPTS_LEN 0x01 #define IP6T_OPTS_OPTS 0x02 #define IP6T_OPTS_NSTRICT 0x04 /* Values for "invflags" field in struct ip6t_rt. */ #define IP6T_OPTS_INV_LEN 0x01 /* Invert the sense of length. */ #define IP6T_OPTS_INV_MASK 0x01 /* All possible flags. */ #endif /*_IP6T_OPTS_H*/ /* S (ARPT_BASE_CTL + 3) #define ARPT_SO_GET_MAX (ARPT_SO_GET_REVISION_TARGET) /* The argument to ARPT_SO_GET_INFO */ struct arpt_getinfo { /* Which table: caller fills this in. */ char name[XT_TABLE_MAXNAMELEN]; /* Kernel fills these in. */ /* Which hook entry points are valid: bitmask */ unsigned int valid_hooks; /* Hook entry points: one per netfilter hook. */ unsigned int hook_entry[NF_ARP_NUMHOOKS]; /* Underflow points. */ unsigned int underflow[NF_ARP_NUMHOOKS]; /* Number of entries */ unsigned int num_entries; GPL-2.0-only WITH Linux-syscall-note */ /* * RP1 PiSP Front End Driver Configuration structures * * Copyright (C) 2021 - Raspberry Pi Ltd. * */ #ifndef _PISP_FE_CONFIG_ #define _PISP_FE_CONFIG_ #include #include "pisp_common.h" #include "pisp_fe_statistics.h" #define PISP_FE_NUM_OUTPUTS 2 enum pisp_fe_enable { PISP_FE_ENABLE_INPUT = 0x000001, PISP_FE_ENABLE_DECOMPRESS = 0x000002, PISP_FE_ENABLE_DECOMPAND = 0x000004, PISP_FE_ENABLE_BLA = 0x000008, PISP_FE_ENABLE_DPC = 0x000010, PISP_FE_ENABLE_STATS_CROitch_input_buffer_config { /* low 32 bits followed by high 32 bits */ __u32 addr[2]; } __attribute__((packed)); #define PISP_BE_STITCH_STREAMING_LONG 0x8000 #define PISP_BE_STITCH_EXPOSURE_RATIO_MASK 0x7fff /** * struct pisp_be_stitch_config - PiSP Back End Stitch config * * Stitch block configuration * * @threshold_lo: Low threshold value * @threshold_diff_power: Low and high threshold difference * @pad: Padding bytes * @exposure_ratio: Multiplier to convert long exposure pixels into * short exposure pixels * ach colour channel, with * pages stored consecutively in memory. Each 32-bit integer packs 3 8-bit * correction coefficients for a single node, one for each of the three light * sources. The 8 most significant bits are unused. The following table * describes the layout:: * * +----------- Page (Colour Plane) 0 -------------+ * | @mesh[i] | Mesh Point | Bits | Light Source | * +-----------+------------+-------+--------------+ * | 0 | 0,0 | 16,23 | LS2 | * | | | 08-15 | LS1 ING_CONFIG, MALI_C55_PARAM_MESH_SHADING_SELECTION, }; /** * struct mali_c55_params_sensor_off_preshading - offset subtraction for each * color channel * * Provides removal of the sensor black level from the sensor data. Separate * offsets are provided for each of the four Bayer component color channels * which are defaulted to R, Gr, Gb, B. * * header.type should be set to MALI_C55_PARAM_BLOCK_SENSOR_OFFS from * :c:type:`mali_c55_param_block_type` for this block. * * @header: The Mali-C55 parameters block header @version: The parameters buffer version (driver-specific) * @data_size: The configuration data effective size, excluding this header * @data: The configuration data * * This structure contains the configuration parameters of the ISP algorithms, * serialized by userspace into a data buffer. Each configuration parameter * block is represented by a block-specific structure which contains a * :c:type:`v4l2_isp_params_block_header` entry as first member. Userspace * populates the @data buffer with configuration parameters for t * Enables hardware time stamping for outgoing packets; * the sender of the packet decides which are to be * time stamped by setting %SOF_TIMESTAMPING_TX_SOFTWARE * before sending the packet. */ HWTSTAMP_TX_ON, /* * Enables time stamping for outgoing packets just as * HWTSTAMP_TX_ON does, but also enables time stamp insertion * directly into Sync packets. In this case, transmitted Sync * packets will not received a time stamp via the socket error * queue. */ HWTSTAMP_TX_ONESTEP_SYNC, /* * Same as HWTST * Stops monitoring the previously enabled events. */ #define COUNTER_DISABLE_EVENTS_IOCTL _IO(0x3E, 0x02) /** * struct counter_event - Counter event data * @timestamp: best estimate of time of event occurrence, in nanoseconds * @value: component value * @watch: component watch configuration * @status: return status (system error number) */ struct counter_event { __aligned_u64 timestamp; __aligned_u64 value; struct counter_watch watch; __u8 status; }; /* Count direction values */ enum counter_count_direction { COUNTER struct sockaddr_pppol2tpv3in6 { __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ unsigned int sa_protocol; /* protocol identifier */ struct pppol2tpv3in6_addr pppol2tp; } __attribute__((packed)); /* Codes to identify message types */ #define PADI_CODE 0x09 #define PADO_CODE 0x07 #define PADR_CODE 0x19 #define PADS_CODE 0x65 #define PADT_CODE 0xa7 struct pppoe_tag { __be16 tag_type; __be16 tag_len; char tag_data[]; } __attribute__ ((packed)); /* Tag identifiers */ #define PTT_EOL __cpu_to_be16(0x0000) #ine SO_VM_SOCKETS_CONNECT_TIMEOUT_OLD 6 /* Option name for using non-blocking send/receive. Use as the option name * for setsockopt(3) or getsockopt(3) to set or get the non-blocking * transmit/receive flag for a STREAM socket. This flag determines whether * send() and recv() can be called in non-blocking contexts for the given * socket. The value is a signed integer. * * This option is only relevant to kernel endpoints, where descheduling the * thread of execution is not allowed, for example, while holding a spinlock. that decoding * is performed one slice at a time. In this mode, * V4L2_CID_STATELESS_H264_SLICE_PARAMS must contain the parsed slice * parameters and the OUTPUT buffer must contain a single slice. * V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF feature is used * in order to support multislice frames. * @V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED: indicates that * decoding is performed per frame. The OUTPUT buffer must contain * all slices and also both fields. This mode is typically supported * by device drivers that are ab_LEVEL_7_2 = 22, V4L2_MPEG_VIDEO_AV1_LEVEL_7_3 = 23 }; #define V4L2_CID_MPEG_VIDEO_AVERAGE_QP (V4L2_CID_CODEC_BASE + 657) /* MPEG-class control IDs specific to the CX2341x driver as defined by V4L2 */ #define V4L2_CID_CODEC_CX2341X_BASE (V4L2_CTRL_CLASS_CODEC | 0x1000) #define V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE (V4L2_CID_CODEC_CX2341X_BASE+0) enum v4l2_mpeg_cx2341x_video_spatial_filter_mode { V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_MANUAL = 0, V4L2_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE_AUTO = 1, }; #d_DEC_PLAYBACK_LEFT = 2, V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT = 3, V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO = 4, V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5, }; #define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_CODEC_BASE+113) /* MPEG video controls specific to multiplexed streams */ #define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_CODEC_BASE+200) enum v4l2_mpeg_video_encoding { V4L2_MPEG_VIDEO_ENCODING_MPEG_1 = 0, V4L2_MPEG_VIDEO_ENCODING_MPEG_2 = 1, V4L2_MPEG_VIDEO_ENCODING_MPEG_4_AVC = 2, }; #dO_GPU_F_RESOURCE_BLOB 3 /* * VIRTIO_GPU_CMD_CREATE_CONTEXT with * context_init and multiple timelines */ #define VIRTIO_GPU_F_CONTEXT_INIT 4 /* * The device provides a valid blob_alignment * field in its configuration and both * VIRTIO_GPU_CMD_RESOURCE_CREATE_BLOB and * VIRTIO_GPU_CMD_RESOURCE_MAP_BLOB requests * must be aligned to that value. */ #define VIRTIO_GPU_F_BLOB_ALIGNMENT 5 enum virtio_gpu_ctrl_type { VIRTIO_GPU_UNDEFINED = 0, /* 2d commands */ VIRTIO_GPU_CMD_GET_DISPLAY_INFO = 0x0100, VIRf the * details of formatting and sending messages on that channel. You do * not, for instance, have to format a send command, you just send * whatever command you want to the channel, the driver will create * the send command, automatically issue receive command and get even * commands, and pass those up to the proper user. */ /* The magic IOCTL value for this interface. */ #define IPMI_IOC_MAGIC 'i' /* Messages sent to the interface are this format. */ struct ipmi_req { unsigned char *addr; /* Address to send the mess (1 << 8) /* * If the NOTIFICATION_PRESENT flag is set, the hypervisor will send * a notification every time it updates seq_count to a new even number. */ #define VMCLOCK_FLAG_NOTIFICATION_PRESENT (1 << 9) __u8 pad[2]; __u8 clock_status; #define VMCLOCK_STATUS_UNKNOWN 0 #define VMCLOCK_STATUS_INITIALIZING 1 #define VMCLOCK_STATUS_SYNCHRONIZED 2 #define VMCLOCK_STATUS_FREERUNNING 3 #define VMCLOCK_STATUS_UNRELIABLE 4 /* * The time exposed through this device is never smeared. This field * corresponds to the 's* IPv4-specific defines for netfilter. * (C)1998 Rusty Russell -- This code is GPL. */ #ifndef __LINUX_IP_NETFILTER_H #define __LINUX_IP_NETFILTER_H #include #include /* only for userspace compatibility */ /* IP Hooks */ /* After promisc drops, checksum checks. */ #define NF_IP_PRE_ROUTING 0 /* If the packet is destined for this box. */ #define NF_IP_LOCAL_IN 1 /* If the packet is destined for another interface. */ #define NF_IP_FORWARD 2 /* Packets coming from a local process. */ #0, \ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \ 229500000, 64, 192, 304, 1, 3, 46, 0, 0, 0, \ V4L2_DV_BT_STD_DMT, 0) \ } #define V4L2_DV_BT_DMT_1600X1200P120_RB { \ .type = V4L2_DV_BT_656_1120, \ V4L2_INIT_BT_TIMINGS(1600, 1200, 0, V4L2_DV_HSYNC_POS_POL, \ 268250000, 48, 32, 80, 3, 4, 64, 0, 0, 0, \ V4L2_DV_BT_STD_DMT | V4L2_DV_BT_STD_CVT, \ V4L2_DV_FL_REDUCED_BLANKING) \ } /* WSXGA+ resolutions */ #define V4L2_DV_BT_DMT_1680X1050P60_RB { \ .type = V4L2_DV_BT_656_1120, \ V4L2_INIT_BT_TIMINGS(1680, 1050, 0, VO line as set by * whatever is using it, will be empty if there is no current user but may * also be empty if the consumer doesn't set this up * * Note: This struct is part of ABI v1 and is deprecated. * Use ABI v2 and &struct gpio_v2_line_info instead. */ struct gpioline_info { __u32 line_offset; __u32 flags; char name[GPIO_MAX_NAME_SIZE]; char consumer[GPIO_MAX_NAME_SIZE]; }; /* Maximum number of requested handles */ #define GPIOHANDLES_MAX 64 /* Possible line status change events */ enum { GPIOLINE_CHANGED_REQUESTED- Values of GPIO lines * @bits: a bitmap containing the value of the lines, set to 1 for active * and 0 for inactive * @mask: a bitmap identifying the lines to get or set, with each bit * number corresponding to the index into &struct * gpio_v2_line_request.offsets */ struct gpio_v2_line_values { __aligned_u64 bits; __aligned_u64 mask; }; /** * enum gpio_v2_line_attr_id - &struct gpio_v2_line_attribute.id values * identifying which field of the attribute union is in use. * @GPIO_V2_LINE_ATTR_ID_FLAGS: flags field is in s only. * @subsample_hor_inc: Subsample Horizontal points increment Range 2 - 32, even * values only. * @alaw_enable: AEW ALAW EN flag. */ struct omap3isp_h3a_aewb_config { /* * Common fields. * They should be the first ones and must be in the same order as in * ispstat_generic_config struct. */ __u32 buf_size; __u16 config_counter; /* Private fields */ __u16 saturation_limit; __u16 win_height; __u16 win_width; __u16 ver_win_count; __u16 hor_win_count; __u16 ver_win_start; __u16 hor_win_sdr; xfrm_address_t daddr; __u16 family; __u8 splen; __u8 dplen; }; struct xfrm_user_offload { int ifindex; __u8 flags; }; /* This flag was exposed without any kernel code that supports it. * Unfortunately, strongswan has the code that sets this flag, * which makes it impossible to reuse this bit. * * So leave it here to make sure that it won't be reused by mistake. */ #define XFRM_OFFLOAD_IPV6 1 #define XFRM_OFFLOAD_INBOUND 2 /* Two bits above are relevant for state path only, while * offload is used f 24 */ #define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ #define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750 and some Freescale UARTs) */ #define UART_FCR_R_TRIG_SHIFT 6 #define UART_FCR_R_TRIG_BITS(x) \ (((x) & UART_FCR_TRIGGER_MASK) >> UART_FCR_R_TRIG_SHIFT) #define UART_FCR_R_TRIG_MAX_STATE 4 #define UART_LCR 3 /* Out: Line Control Register */ /* * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. */ UT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISINe CEC_MSG_RECORD_ON 0x09 /* Record Source Type Operand (rec_src_type) */ #define CEC_OP_RECORD_SRC_OWN 1 #define CEC_OP_RECORD_SRC_DIGITAL 2 #define CEC_OP_RECORD_SRC_ANALOG 3 #define CEC_OP_RECORD_SRC_EXT_PLUG 4 #define CEC_OP_RECORD_SRC_EXT_PHYS_ADDR 5 /* Service Identification Method Operand (service_id_method) */ #define CEC_OP_SERVICE_ID_METHOD_BY_DIG_ID 0 #define CEC_OP_SERVICE_ID_METHOD_BY_CHANNEL 1 /* Digital Service Broadcast System Operand (dig_bcast_system) */ #define CEC_OP_DIG_SERVICE_BCAST_SYSTEM_ARIB_MASK_SPECIFIC; } static __inline__ int cec_is_unregistered(__u16 log_addr_mask) { return log_addr_mask & CEC_LOG_ADDR_MASK_UNREGISTERED; } static __inline__ int cec_is_unconfigured(__u16 log_addr_mask) { return log_addr_mask == 0; } /* * Use this if there is no vendor ID (CEC_G_VENDOR_ID) or if the vendor ID * should be disabled (CEC_S_VENDOR_ID) */ #define CEC_VENDOR_ID_NONE 0xffffffff /* The message handling modes */ /* Modes for initiator */ #define CEC_MODE_NO_INITIATOR (0x0 << 0) #define CEC_MODE_INITIATOR (0x1 << TS_MAX = (__NETDEV_A_PAGE_POOL_STATS_MAX - 1) }; enum { NETDEV_A_NAPI_IFINDEX = 1, NETDEV_A_NAPI_ID, NETDEV_A_NAPI_IRQ, NETDEV_A_NAPI_PID, NETDEV_A_NAPI_DEFER_HARD_IRQS, NETDEV_A_NAPI_GRO_FLUSH_TIMEOUT, NETDEV_A_NAPI_IRQ_SUSPEND_TIMEOUT, NETDEV_A_NAPI_THREADED, __NETDEV_A_NAPI_MAX, NETDEV_A_NAPI_MAX = (__NETDEV_A_NAPI_MAX - 1) }; enum { __NETDEV_A_XSK_INFO_MAX, NETDEV_A_XSK_INFO_MAX = (__NETDEV_A_XSK_INFO_MAX - 1) }; enum { NETDEV_A_QUEUE_ID = 1, NETDEV_A_QUEUE_IFINDEX, NETDEV_A_QUEUE_TYPE, NETDEV_A_QUEUE_NAPI_Int ce_sdsttype; /* type/unit of element #3 */ int ce_sdstunit; int ce_flags; }; #define CE_INVERT1 1 #define CE_INVERT2 2 /* * CHIOPOSITION * move the transport element (robot arm) to a specific element. */ struct changer_position { int cp_type; int cp_unit; int cp_flags; }; #define CP_INVERT 1 /* * CHIOGSTATUS * get element status for all elements of a specific type */ struct changer_element_status { int ces_type; unsigned char *ces_data; }; #define CESTATUS_FULL 0x01 /* full */ #dd * for linear histogram stats, specifying the size of the bucket; * @name: The name string for the stats. Its size is indicated by the * &kvm_stats_header->name_size. */ struct kvm_stats_desc { __u32 flags; __s16 exponent; __u16 size; __u32 offset; __u32 bucket_size; __DECLARE_FLEX_ARRAY(char, name); }; #define KVM_GET_STATS_FD _IO(KVMIO, 0xce) /* Available with KVM_CAP_XSAVE2 */ #define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) /* Available with KVM_CAP_S390_PROTECTED_DUMP */ #define KVM_S390_PBLE 2 #define KVM_CLOCK_REALTIME (1 << 2) #define KVM_CLOCK_HOST_TSC (1 << 3) struct kvm_clock_data { __u64 clock; __u32 flags; __u32 pad0; __u64 realtime; __u64 host_tsc; __u32 pad[4]; }; /* For KVM_CAP_SW_TLB */ #define KVM_MMU_FSL_BOOKE_NOHV 0 #define KVM_MMU_FSL_BOOKE_HV 1 struct kvm_config_tlb { __u64 params; __u64 array; __u32 mmu_type; __u32 array_len; }; struct kvm_dirty_tlb { __u64 bitmap; __u32 num_dirty; }; /* Available with KVM_CAP_ONE_REG */ #define KVM_REG_ARCH_MASK 0xff00000000000000ULL #defindisconnected, not considered as a valid * input * @DPLL_PIN_STATE_SELECTABLE: pin enabled for automatic input selection */ enum dpll_pin_state { DPLL_PIN_STATE_CONNECTED = 1, DPLL_PIN_STATE_DISCONNECTED, DPLL_PIN_STATE_SELECTABLE, /* private: */ __DPLL_PIN_STATE_MAX, DPLL_PIN_STATE_MAX = (__DPLL_PIN_STATE_MAX - 1) }; /** * enum dpll_pin_operstate - defines possible operational states of a pin with * respect to its parent DPLL device, valid values for DPLL_A_PIN_OPERSTATE * attribute * @DPLL_PIN_OPERSTATE_ACTIVETCHLEVEL 0 #define DM_VERSION_EXTRA "-ioctl (2025-04-28)" /* Status bits */ #define DM_READONLY_FLAG (1 << 0) /* In/Out */ #define DM_SUSPEND_FLAG (1 << 1) /* In/Out */ #define DM_PERSISTENT_DEV_FLAG (1 << 3) /* In */ /* * Flag passed into ioctl STATUS command to get table information * rather than current status. */ #define DM_STATUS_TABLE_FLAG (1 << 4) /* In */ /* * Flags that indicate whether a table is present in either of * the two table slots that a device has. */ #define DM_ACTIVE_PRESENT_FLAG (1 << 5) /* Out */ ocate_in { uint64_t fh; uint64_t offset; uint64_t length; uint32_t mode; uint32_t padding; }; /** * FUSE request unique ID flag * * Indicates whether this is a resend request. The receiver should handle this * request accordingly. */ #define FUSE_UNIQUE_RESEND (1ULL << 63) /** * This value will be set by the kernel to * (struct fuse_in_header).{uid,gid} fields in * case when: * - fuse daemon enabled FUSE_ALLOW_IDMAP * - idmapping information is not available and uid/gid * can not be mapped in accordance with an H * * 7.36 * - extend fuse_init_in with reserved fields, add FUSE_INIT_EXT init flag * - add flags2 to fuse_init_in and fuse_init_out * - add FUSE_SECURITY_CTX init flag * - add security context to create, mkdir, symlink, and mknod requests * - add FUSE_HAS_INODE_DAX, FUSE_ATTR_DAX * * 7.37 * - add FUSE_TMPFILE * * 7.38 * - add FUSE_EXPIRE_ONLY flag to fuse_notify_inval_entry * - add FOPEN_PARALLEL_DIRECT_WRITES * - add total_extlen to fuse_in_header * - add FUSE_MAX_NR_SECCTX * - add extension header_EXC_INV 0x100000 /* floating point invalid operation */ # define PR_FP_EXC_DISABLED 0 /* FP exceptions disabled */ # define PR_FP_EXC_NONRECOV 1 /* async non-recoverable exc. mode */ # define PR_FP_EXC_ASYNC 2 /* async recoverable exception mode */ # define PR_FP_EXC_PRECISE 3 /* precise exception mode */ /* Get/set whether we use statistical process timing or accurate timestamp * based process timing */ #define PR_GET_TIMING 13 #define PR_SET_TIMING 14 # define PR_TIMING_STATISTICAL 0 /* Normal, traditional, T isn't necessary for a GUSAGE to return valid data. */ #define HID_REPORT_ID_UNKNOWN 0xffffffff #define HID_REPORT_ID_FIRST 0x00000100 #define HID_REPORT_ID_NEXT 0x00000200 #define HID_REPORT_ID_MASK 0x000000ff #define HID_REPORT_ID_MAX 0x000000ff #define HID_REPORT_TYPE_INPUT 1 #define HID_REPORT_TYPE_OUTPUT 2 #define HID_REPORT_TYPE_FEATURE 3 #define HID_REPORT_TYPE_MIN 1 #define HID_REPORT_TYPE_MAX 3 struct hiddev_field_info { __u32 report_type; __u32 report_id; __u32 field_index; __u32 maxusage; __uM_LOCKDOOR 0x5329 /* lock or unlock door */ #define CDROM_DEBUG 0x5330 /* Turn debug messages on/off */ #define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */ /* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386. * Future CDROM ioctls should be kept below 0x537F */ /* This ioctl is only used by sbpcd at the moment */ #define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ /* conflict with SCSI_IOCTL_GET_IDLUN */ /* DVD-ROM Specific ioctls */ #define DVD_READ_STRUCT 0x5390 /* Read structure */ #ER_ARIA_GCM_256_SALT_SIZE 4 #define TLS_CIPHER_ARIA_GCM_256_TAG_SIZE 16 #define TLS_CIPHER_ARIA_GCM_256_REC_SEQ_SIZE 8 #define TLS_SET_RECORD_TYPE 1 #define TLS_GET_RECORD_TYPE 2 struct tls_crypto_info { __u16 version; __u16 cipher_type; }; struct tls12_crypto_info_aes_gcm_128 { struct tls_crypto_info info; unsigned char iv[TLS_CIPHER_AES_GCM_128_IV_SIZE]; unsigned char key[TLS_CIPHER_AES_GCM_128_KEY_SIZE]; unsigned char salt[TLS_CIPHER_AES_GCM_128_SALT_SIZE]; unsigned char rec_seq[TLS_CIPHER_AES_GCM_128_REC_SEQ_SIZE];e request and reply messages have a fixed number * of TLVs (usually zero or one); however, some reply messages may return * a variable number of TLVs. A failed request is denoted by the presence * of an "error string" TLV in the reply message instead of the TLV(s) the * reply should contain if the request succeeds. */ /* * Public commands: * May be issued by any process. * Accepted by own node, or by remote node only if remote management enabled. */ #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #duse. */ CRYPTOCFGA_REPORT_SIG, /* struct crypto_report_sig */ __CRYPTOCFGA_MAX #define CRYPTOCFGA_MAX (__CRYPTOCFGA_MAX - 1) }; struct crypto_user_alg { char cru_name[CRYPTO_MAX_NAME]; char cru_driver_name[CRYPTO_MAX_NAME]; char cru_module_name[CRYPTO_MAX_NAME]; __u32 cru_type; __u32 cru_mask; __u32 cru_refcnt; __u32 cru_flags; }; /* No longer supported, do not use. */ struct crypto_stat_aead { char type[CRYPTO_MAX_NAME]; __u64 stat_encrypt_cnt; __u64 stat_encrypt_tlen; __u64 stat_decrypt_cnt; __u64 stat_decrypt_tps increasing perms */ #define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */ #define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */ #define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ #define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ #define AUDIT_SECCOMP 1326 /* Secure Computing event */ #define AUDIT_PROCTITLE 1327 /* Proctitle emit event */ #define AUDIT_FEATURE_CHANGE 1328 /* audit log listing feature changes */ #define AUDIT_REPLACE 1329 /* ReplaYPES_H #define _LINUX_VHOST_TYPES_H /* Userspace interface for in-kernel virtio accelerators. */ /* vhost is used to reduce the number of system calls involved in virtio. * * Existing virtio net code is used in the guest without modification. * * This header includes interface used by userspace hypervisor for * device configuration. */ #include #include #include struct vhost_vring_state { unsigned int index; unsigned int num; }; struct vhost_vring_file { unR_KEY_IPV6_DST, /* struct in6_addr */ TCA_FLOWER_KEY_IPV6_DST_MASK, /* struct in6_addr */ TCA_FLOWER_KEY_TCP_SRC, /* be16 */ TCA_FLOWER_KEY_TCP_DST, /* be16 */ TCA_FLOWER_KEY_UDP_SRC, /* be16 */ TCA_FLOWER_KEY_UDP_DST, /* be16 */ TCA_FLOWER_FLAGS, TCA_FLOWER_KEY_VLAN_ID, /* be16 */ TCA_FLOWER_KEY_VLAN_PRIO, /* u8 */ TCA_FLOWER_KEY_VLAN_ETH_TYPE, /* be16 */ TCA_FLOWER_KEY_ENC_KEY_ID, /* be32 */ TCA_FLOWER_KEY_ENC_IPV4_SRC, /* be32 */ TCA_FLOWER_KEY_ENC_IPV4_SRC_MASK,/* be32 */ TCA_FLOWER_KEY_ENC_IPV4_DST, /* beUME(dev, voice, value) SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100) #define SEQ_PANNING(dev, voice, pos) SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2) /* * Timing and synchronization macros */ #define _TIMER_EVENT(ev, parm) {_SEQ_NEEDBUF(8);\ _seqbuf[_seqbufptr+0] = EV_TIMING; \ _seqbuf[_seqbufptr+1] = (ev); \ _seqbuf[_seqbufptr+2] = 0;\ _seqbuf[_seqbufptr+3] = 0;\ *(unsigned int *)&_seqbuf[_seqbufptr+4] = (parm); \ _SEQ_ADVBUF(8);} #define SEQ_START_TIMER() _TIMER_EVENT(TMR_SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC) typedef struct mixer_info { char id[16]; char name[32]; int modify_counter; int fillers[10]; } mixer_info; typedef struct _old_mixer_info /* Obsolete */ { char id[16]; char name[32]; } _old_mixer_info; #define SOUND_MIXER_INFO _SIOR ('M', 101, mixer_info) #define SOUND_OLD_MIXER_INFO _SIOR ('M', 101, _old_mixer_info) /* * A mechanism for accessing "proprietary" mixer features. This method * permits passing 128 bytes of arbitrary data between a mixer appli_SOURCE _SIOWR('T', 6, int) # define TMR_INTERNAL 0x00000001 # define TMR_EXTERNAL 0x00000002 # define TMR_MODE_MIDI 0x00000010 # define TMR_MODE_FSK 0x00000020 # define TMR_MODE_CLS 0x00000040 # define TMR_MODE_SMPTE 0x00000080 #define SNDCTL_TMR_METRONOME _SIOW ('T', 7, int) #define SNDCTL_TMR_SELECT _SIOW ('T', 8, int) /* * Some big endian/little endian handling macros */ #define _LINUX_PATCHKEY_H_INDIRECT #include #undef _LINUX_PATCHKEY_H_INDIRECT # if defined(__BYTE_ORDER) # if __BYTE_ORDER ==rays_user; /* max subflows that userspace is interested in; * the buffers at subflow_info/tcp_info * are respectively at least: * size_arrays * size_sfinfo_user * size_arrays * size_tcpinfo_user * bytes wide */ __aligned_u64 subflow_info; __aligned_u64 tcp_info; struct mptcp_info mptcp_info; }; /* MPTCP socket options */ #define MPTCP_INFO 1 #define MPTCP_TCPINFO 2 #define MPTCP_SUBFLOW_ADDRS 3 #define MPTCP_FULL_INFO 4 #endif /* _MPTCP_H */ /* SPDX-License-Identifier: ((GPL-2.0on_data struct and returns with the TEE version * data filled in. */ #define TEE_IOC_VERSION _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 0, \ struct tee_ioctl_version_data) /** * struct tee_ioctl_shm_alloc_data - Shared memory allocate argument * @size: [in/out] Size of shared memory to allocate * @flags: [in/out] Flags to/from allocation. * @id: [out] Identifier of the shared memory * * The flags field should currently be zero as input. Updated by the call * with actual flags as defined by TEE_IOCTL_SHM_* above. * Thi MAP_SHARED_VALIDATE 0x03 /* share + validate extension flags */ #define MAP_DROPPABLE 0x08 /* Zero memory under memory pressure. */ /* * Huge page size encoding when MAP_HUGETLB is specified, and a huge page * size other than the default is desired. See hugetlb_encode.h. * All known huge page size encodings are provided here. It is the * responsibility of the application to know which sizes are supported on * the running system. See mmap(2) man page for details. */ #define MAP_HUGE_SHIFT HUGETLB_FLAG_ENCODE_SHIFT #defin_u64 wp; /* Zone write pointer position */ __u8 type; /* Zone type */ __u8 cond; /* Zone condition */ __u8 non_seq; /* Non-sequential write resources active */ __u8 reset; /* Reset write pointer recommended */ __u8 resv[4]; __u64 capacity; /* Zone capacity in number of sectors */ __u8 reserved[24]; }; /** * struct blk_zone_report - BLKREPORTZONE ioctl request/reply * * @sector: starting sector of report * @nr_zones: IN maximum / OUT actual * @flags: one or more flags as defined by enum blk_zone_report_flags. * @flI config space offset of this PCI I/O request * * Need keep same header layout with &struct acrn_pio_request. */ struct acrn_pci_request { __u32 direction; __u32 reserved[3]; __u64 size; __u32 value; __u32 bus; __u32 dev; __u32 func; __u32 reg; }; /** * struct acrn_io_request - 256-byte ACRN I/O request * @type: Type of this request (ACRN_IOREQ_TYPE_*). * @completion_polling: Polling flag. Hypervisor will poll completion of the * I/O request if this flag set. * @reserved0: Reserved fields. * @reqs: Union of ddefine IP_VS_TUNNEL_ENCAP_FLAG_REMCSUM (1 << 1) /* * The struct ip_vs_service_user and struct ip_vs_dest_user are * used to set IPVS rules through setsockopt. */ struct ip_vs_service_user { /* virtual service addresses */ __u16 protocol; __be32 addr; /* virtual ip address */ __be16 port; __u32 fwmark; /* firwall mark of service */ /* virtual service options */ char sched_name[IP_VS_SCHEDNAME_MAXLEN]; unsigned int flags; /* virtual service flags */ unsigned int timeout; /* persistent timeout in sec */ __efine KEY_TAB 15 #define KEY_Q 16 #define KEY_W 17 #define KEY_E 18 #define KEY_R 19 #define KEY_T 20 #define KEY_Y 21 #define KEY_U 22 #define KEY_I 23 #define KEY_O 24 #define KEY_P 25 #define KEY_LEFTBRACE 26 #define KEY_RIGHTBRACE 27 #define KEY_ENTER 28 #define KEY_LEFTCTRL 29 #define KEY_A 30 #define KEY_S 31 #define KEY_D 32 #define KEY_F 33 #define KEY_G 34 #define KEY_H 35 #define KEY_J 36 #define KEY_K 37 #define KEY_L 38 #define KEY_SEMICOLON 39 #define KEY_APOSTROPHE 40 #defruncate a file with :manpage:`truncate(2)`, * :manpage:`ftruncate(2)`, :manpage:`creat(2)`, or :manpage:`open(2)` with * ``O_TRUNC``. This access right is available since the third version of the * Landlock ABI. * - %LANDLOCK_ACCESS_FS_IOCTL_DEV: Invoke :manpage:`ioctl(2)` commands on an opened * character or block device. * * This access right applies to all `ioctl(2)` commands implemented by device * drivers. However, the following common IOCTL commands continue to be * invokable independent of the %LANDL* Type and number of args */ char name[IFNAMSIZ]; /* Name of the extension */ }; /* ----------------------- WIRELESS EVENTS ----------------------- */ /* * Wireless events are carried through the rtnetlink socket to user * space. They are encapsulated in the IFLA_WIRELESS field of * a RTM_NEWLINK message. */ /* * A Wireless Event. Contains basically the same data as the ioctl... */ struct iw_event { __u16 len; /* Real length of this stuff */ __u16 cmd; /* Wireless IOCTL */ union iwreq_data u; /* IOCTL fixed paylIW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ #define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ #define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ #define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ #define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */ #define IW_ENCODE_TEMP 0x0400 /* Temporary key */ /* Power management flags available (along with the value, if any) */ #define IW_POWER_ON 0x0000 /* No details... */ #define IW_POWER_TYPE 0xF000 /* Type of parameter */ rted */ #define SCOM_CHECK_PROTECTED 0x00000002 /* Interface blocked by secure boot */ /* Flags for SCOM reset */ #define SCOM_RESET_INTF 0x00000001 /* Reset interface */ #define SCOM_RESET_PIB 0x00000002 /* Reset PIB */ #define FSI_SCOM_CHECK _IOR('s', 0x00, __u32) #define FSI_SCOM_READ _IOWR('s', 0x01, struct scom_access) #define FSI_SCOM_WRITE _IOWR('s', 0x02, struct scom_access) #define FSI_SCOM_RESET _IOW('s', 0x03, __u32) /* * /dev/sbefifo* ioctl interface */ /** * FSI_SBEFIFO_CMD_TIMEOUT sets the timeout for writingload * @packet_type: batman-adv packet type, part of the general header * @version: batman-adv protocol version, part of the general header * @ttl: time to live for this packet, part of the general header * @reserved: reserved byte for alignment * @seqno: sequence identification * @orig: originator of the broadcast packet */ struct batadv_bcast_packet { __u8 packet_type; __u8 version; /* batman version field */ __u8 ttl; __u8 reserved; __be32 seqno; __u8 orig[ETH_ALEN]; /* "4 bytes boundary + 2 bytes" long ying a fragment of the original * payload packet * @BATADV_UNICAST_4ADDR: unicast packet including the originator address of * the sender * @BATADV_ICMP: unicast packet like IP ICMP used for ping or traceroute * @BATADV_UNICAST_TVLV: unicast packet carrying TVLV containers */ enum batadv_packettype { /* 0x00 - 0x3f: local packets or special rules for handling */ BATADV_IV_OGM = 0x00, BATADV_BCAST = 0x01, BATADV_CODED = 0x02, BATADV_ELP = 0x03, BATADV_OGM2 = 0x04, BATADV_MCAST the active shared key to be used to build * the association shared key. */ struct sctp_authkeyid { sctp_assoc_t scact_assoc_id; __u16 scact_keynumber; }; /* * 7.1.23. Get or set delayed ack timer (SCTP_DELAYED_SACK) * * This option will effect the way delayed acks are performed. This * option allows you to get or set the delayed ack time, in * milliseconds. It also allows changing the delayed ack frequency. * Changing the frequency to 1 disables the delayed sack algorithm. If * the assoc_id is 0, then this sets o_flag { IOMMU_VEVENTQ_FLAG_LOST_EVENTS = (1U << 0), }; /** * struct iommufd_vevent_header - Virtual Event Header for a vEVENTQ Status * @flags: Combination of enum iommu_veventq_flag * @sequence: The sequence index of a vEVENT in the vEVENTQ, with a range of * [0, INT_MAX] where the following index of INT_MAX is 0 * * Each iommufd_vevent_header reports a sequence index of the following vEVENT: * * +----------------------+-------+----------------------+-------+---+-------+ * | header0 {sequence=0} | data0 | heat_set_dirty_tracking_flags * @hwpt_id: HW pagetable ID that represents the IOMMU domain * @__reserved: Must be 0 * * Toggle dirty tracking on an HW pagetable. */ struct iommu_hwpt_set_dirty_tracking { __u32 size; __u32 flags; __u32 hwpt_id; __u32 __reserved; }; #define IOMMU_HWPT_SET_DIRTY_TRACKING _IO(IOMMUFD_TYPE, \ IOMMUFD_CMD_HWPT_SET_DIRTY_TRACKING) /** * enum iommufd_hwpt_get_dirty_bitmap_flags - Flags for getting dirty bits * @IOMMU_HWPT_GET_DIRTY_BITMAP_NO_CLEAR: Just read the PTEs without clearing * ** * __swahb32 - return a high and low byte-swapped 32-bit value * @x: value to byteswap * * __swahb32(0x12345678) is 0x34127856 */ #define __swahb32(x) \ (__builtin_constant_p((__u32)(x)) ? \ ___constant_swahb32(x) : \ __fswahb32(x)) /** * __swab16p - return a byteswapped 16-bit value from a pointer * @p: pointer to a naturally-aligned 16-bit value */ static __always_inline __u16 __swab16p(const __u16 *p) { #ifdef __arch_swab16p return __arch_swab16p(p); #else return __swab16(*p); #endif } /** * __swab32p - retS (type of service) */ /* Allow setting promiscuous mode */ /* Allow clearing driver statistics */ /* Allow multicasting */ /* Allow read/write of device-specific registers */ /* Allow activation of ATM control sockets */ #define CAP_NET_ADMIN 12 /* Allow use of RAW sockets */ /* Allow use of PACKET sockets */ /* Allow binding to any address for transparent proxying (also via NET_ADMIN) */ #define CAP_NET_RAW 13 /* Allow locking of shared memory segments */ /* Allow mlock and mlockall (which doesn't really have __u32 pad; }; /* * The IOVA capability allows to report the valid IOVA range(s) * excluding any non-relaxable reserved regions exposed by * devices attached to the container. Any DMA map attempt * outside the valid iova range will return error. * * The structures below define version 1 of this capability. */ #define VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE 1 struct vfio_iova_range { __u64 start; __u64 end; }; struct vfio_iommu_type1_info_cap_iova_range { struct vfio_info_cap_header header; __u32 nr_iovas; __u32 reservE_MIGRATION 1 /* * Upon VFIO_DEVICE_FEATURE_SET, execute a migration state change on the VFIO * device. The new state is supplied in device_state, see enum * vfio_device_mig_state for details * * The kernel migration driver must fully transition the device to the new state * value before the operation returns to the user. * * The kernel migration driver must not generate asynchronous device state * transitions outside of manipulation by the user or the VFIO_DEVICE_RESET * ioctl as described above. * * If this function e string should match a device listed in * the devices subdirectory of the IOMMU group sysfs entry. The * group containing the device must already be added to this context. * Return: new file descriptor on success, -errno on failure. * Availability: When attached to container */ #define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) /* --------------- IOCTLs for DEVICE file descriptors --------------- */ /** * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, * struct vfio_device_info) * * Retrieve infos if the flow was created with this * attribute. * @OVS_FLOW_ATTR_UFID_FLAGS: A 32-bit value of OR'd %OVS_UFID_F_* * flags that provide alternative semantics for flow installation and * retrieval. Optional for all requests. * * These attributes follow the &struct ovs_header within the Generic Netlink * payload for %OVS_FLOW_* commands. */ enum ovs_flow_attr { /* private: */ OVS_FLOW_ATTR_UNSPEC, /* public: */ OVS_FLOW_ATTR_KEY, /* Sequence of OVS_KEY_ATTR_* attributes. */ OVS_FLOW_ATTR_ACTIONS, /* Nested OVS_ACfine OVS_PACKET_VERSION 0x1 enum ovs_packet_cmd { OVS_PACKET_CMD_UNSPEC, /* Kernel-to-user notifications. */ OVS_PACKET_CMD_MISS, /* Flow table miss. */ OVS_PACKET_CMD_ACTION, /* OVS_ACTION_ATTR_USERSPACE action. */ /* Userspace commands. */ OVS_PACKET_CMD_EXECUTE /* Apply actions to a packet. */ }; /** * enum ovs_packet_attr - attributes for %OVS_PACKET_* commands. * @OVS_PACKET_ATTR_PACKET: Present for all notifications. Contains the entire * packet as received, from the start of the Ethernet header onward. Fo/ __u8 lf_reserved2[40]; }; }; }; /* * Extended attribute header format * * This works in a similar way to dirents. There is a fixed size header * followed by a variable length section made up of the name and the * associated data. In the case of a "stuffed" entry, the value is * __inline__ directly after the name, the ea_num_ptrs entry will be * zero in that case. For non-"stuffed" entries, there will be * a set of pointers (aligned to 8 byte boundary) to the block(s) * containing the value. * * The blocks contaiion { __be32 mh_jid; /* Was incarnation number in gfs1 */ __be32 __pad1; }; }; /* * super-block structure * * It's probably good if SIZEOF_SB <= GFS2_BASIC_BLOCK (512 bytes) * * Order is important, need to be able to read old superblocks to do on-disk * version upgrades. */ /* Address of superblock in GFS2 basic blocks */ #define GFS2_SB_ADDR 128 /* The lock number for the superblock (must be zero) */ #define GFS2_SB_LOCK 0 /* Requirement: GFS2_LOCKNAME_LEN % 8 == 0 Includes: the fencing zero at the end */ #droup; /* multicast address */ __u32 gf_fmode; /* filter mode */ __u32 gf_numsrc; /* number of sources */ struct __kernel_sockaddr_storage gf_slist_flex[]; /* interface index */ }; }; }; #define GROUP_FILTER_SIZE(numsrc) \ (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \ + (numsrc) * sizeof(struct __kernel_sockaddr_storage)) #endif #if __UAPI_DEF_IN_PKTINFO struct in_pktinfo { int ipi_ifindex; struct in_addr ipi_spec_dst; struct in_addr ipi_addr; }; #endif /* Structure descwe depend on this being zero */ #define KT_FN 1 #define KT_SPEC 2 #define KT_PAD 3 #define KT_DEAD 4 #define KT_CONS 5 #define KT_CUR 6 #define KT_SHIFT 7 #define KT_META 8 #define KT_ASCII 9 #define KT_LOCK 10 #define KT_LETTER 11 /* symbol that can be acted upon by CapsLock */ #define KT_SLOCK 12 #define KT_DEAD2 13 #define KT_BRL 14 #define KT_CSI 15 /* CSI sequences with modifier support */ #define K(t,v) (((t)<<8)|(v)) #define KTYP(x) ((x) >> 8) #define KVAL(x) ((x) & 0xff) #define K_F1 K(KT_FN,0) #define K_F2 ITS = 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000, NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0, NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000, NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000, NI_GPCT_OR_GATE_BIT = 0x10000000, NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000 }; /* * Bits for setting a clock source with * INSN_CONFIG_SET_CLOCK_SRC when using NI general-purpose counters. */ enum ni_gpct_clock_source_bits { NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f, NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS nter is counting. * @COMEDI_COUNTER_TERMINAL_COUNT: Counter reached terminal count. * * These bitwise values are used by the %INSN_CONFIG_GET_COUNTER_STATUS * configuration instruction to report the status of a counter. */ enum comedi_counter_status_flags { COMEDI_COUNTER_ARMED = 0x1, COMEDI_COUNTER_COUNTING = 0x2, COMEDI_COUNTER_TERMINAL_COUNT = 0x4, }; /* ioctls */ #define CIO 'd' #define COMEDI_DEVCONFIG _IOW(CIO, 0, struct comedi_devconfig) #define COMEDI_DEVINFO _IOR(CIO, 1, struct comedi_devinfo) #define COMEDI_SUBDALL_PERM_EVENTS (FAN_OPEN_PERM |\ FAN_ACCESS_PERM) /* Deprecated - do not use this in programs and do not add new flags here! */ #define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\ FAN_ALL_PERM_EVENTS |\ FAN_Q_OVERFLOW) #define FANOTIFY_METADATA_VERSION 3 struct fanotify_event_metadata { __u32 event_len; __u8 vers; __u8 reserved; __u16 metadata_len; __aligned_u64 mask; __s32 fd; __s32 pid; }; #define FAN_EVENT_INFO_TYPE_FID 1 #define FAN_EVENT_INFO_TYPE_DFID_NAME 2 #define FAN_EVENT_INFO_TYPE_DFID 3 #deC. The transfer terminates with a NAK, or when all those * bytes have been transferred and ACKed. If this is the last message in a * group, it is followed by a STOP. Otherwise it is followed by the next * @i2c_msg transaction segment, beginning with a (repeated) START. * * Alternatively, when the adapter supports %I2C_FUNC_PROTOCOL_MANGLING then * passing certain @flags may have changed those standard protocol behaviors. * Those flags are only for use with broken/nonconforming slaves, and with * adapters which are known 16 */ PSAMPLE_ATTR_USER_COOKIE, /* binary, user provided data */ PSAMPLE_ATTR_SAMPLE_PROBABILITY,/* no argument, interpret rate in * PSAMPLE_ATTR_SAMPLE_RATE as a * probability scaled 0 - U32_MAX. */ __PSAMPLE_ATTR_MAX }; enum psample_command { PSAMPLE_CMD_SAMPLE, PSAMPLE_CMD_GET_GROUP, PSAMPLE_CMD_NEW_GROUP, PSAMPLE_CMD_DEL_GROUP, }; enum psample_tunnel_key_attr { PSAMPLE_TUNNEL_KEY_ATTR_ID, /* be64 Tunnel ID */ PSAMPLE_TUNNEL_KEY_ATTR_IPV4_SRC, /* be32 src IP address. */ PSIELD) __u8 version:4, ihl:4; #else #error "Please fix " #endif __u8 tos; __be16 tot_len; __be16 id; __be16 frag_off; __u8 ttl; __u8 protocol; __sum16 check; __struct_group(/* no tag */, addrs, /* no attrs */, __be32 saddr; __be32 daddr; ); /*The options start here. */ }; struct ip_auth_hdr { __u8 nexthdr; __u8 hdrlen; /* This one is measured in 32 bit units! */ __be16 reserved; __be32 spi; __be32 seq_no; /* Sequence number */ __u8 auth_data[]; /* Variable len but >=4. Mind the 64 bit * Arguments for KFD_IOC_DBG_TRAP_CLEAR_NODE_ADDRESS_WATCH * Clear address watch for device. * * @gpu_id (IN) - target device to clear watch point * @id (IN) - allocated watch id to clear * * Generic errors apply (see kfd_dbg_trap_operations). * Return - 0 on SUCCESS. * - ENODEV if gpu_id not found. * - EINVAL if watch ID has not been allocated. */ struct kfd_ioctl_dbg_trap_clear_node_address_watch_args { __u32 gpu_id; __u32 id; }; /** * kfd_ioctl_dbg_trap_set_flags_args * PUs will use this address * @size: size in bytes * @handle: buffer handle returned to user mode, used to refer to * this allocation for mapping, unmapping and freeing * @mmap_offset: for CPU-mapping the allocation by mmapping a render node * for userptrs this is overloaded to specify the CPU address * @gpu_id: device identifier * @flags: memory type and attributes. See KFD_IOC_ALLOC_MEM_FLAGS above */ struct kfd_ioctl_alloc_memory_of_gpu_args { __u64 va_addr; /* to KFD */for expert scheduling mode available * - 1.21 - Debugger support to subscribe to LDS out-of-address exceptions * - 1.22 - Add queue creation with metadata ring base address * - 1.23 - Add profiler control ioctl to enable/disable profiler on a process */ #define KFD_IOCTL_MAJOR_VERSION 1 #define KFD_IOCTL_MINOR_VERSION 23 struct kfd_ioctl_get_version_args { __u32 major_version; /* from KFD */ __u32 minor_version; /* from KFD */ }; /* For kfd_ioctl_create_queue_args.queue_type. */ #define KFD_IOC_QUEUE_TYPE_COMPUTE 0x0 #defidr_len; /* Ethernet + IP + tcp/udp hdrs */ __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ __virtio16 csum_start; /* Position to start checksumming from */ __virtio16 csum_offset; /* Offset after that to place checksum */ }; /* This is the version of the header to use when the MRG_RXBUF * feature has been negotiated. */ struct virtio_net_hdr_mrg_rxbuf { struct virtio_net_hdr hdr; __virtio16 num_buffers; /* Number of merged rx buffers */ }; #endif /* ...VIRTIO_NET_NO_LEGACY */ /* * Control virtqueue data sct rio_pw_filter { __u32 mask; __u32 low; __u32 high; __u32 pad0; }; /* RapidIO base address for inbound requests set to value defined below * indicates that no specific RIO-to-local address translation is requested * and driver should use direct (one-to-one) address mapping. */ #define RIO_MAP_ANY_ADDR (__u64)(~((__u64) 0)) struct rio_mmap { __u16 rioid; __u16 pad0[3]; __u64 rio_addr; __u64 length; __u64 handle; __u64 address; }; struct rio_dma_mem { __u64 length; /* length of DMA memory */ __u64 dma_handle; /* h_BASE = 0x80, /* Any possible custom types, unrelated to NLA_* values go below */ DEVLINK_VAR_ATTR_TYPE_U64_ARRAY, }; enum devlink_attr { /* don't change the order or add anything between, this is ABI! */ DEVLINK_ATTR_UNSPEC, /* bus name + dev name together are a handle for devlink entity */ DEVLINK_ATTR_BUS_NAME, /* string */ DEVLINK_ATTR_DEV_NAME, /* string */ DEVLINK_ATTR_PORT_INDEX, /* u32 */ DEVLINK_ATTR_PORT_TYPE, /* u16 */ DEVLINK_ATTR_PORT_DESIRED_TYPE, /* u16 */ DEVLINK_ATTR_PORT_NETDEV_IFINDEX, /* u3_RX_PACKETS, /* u64 */ DEVLINK_ATTR_STATS_RX_BYTES, /* u64 */ DEVLINK_ATTR_STATS_RX_DROPPED, /* u64 */ __DEVLINK_ATTR_STATS_MAX, DEVLINK_ATTR_STATS_MAX = __DEVLINK_ATTR_STATS_MAX - 1 }; /* Specify what sections of a flash component can be overwritten when * performing an update. Overwriting of firmware binary sections is always * implicitly assumed to be allowed. * * Each section must be documented in * Documentation/networking/devlink/devlink-flash.rst * */ enum devlink_flash_overwrite { DEVLINK_FLASH_OVERWRITE_SE local addresses, LINK are destinations, located on directly attached link and UNIVERSE is everywhere in the Universe. Intermediate values are also possible f.e. interior routes could be assigned a value between UNIVERSE and LINK. */ enum rt_scope_t { RT_SCOPE_UNIVERSE=0, /* User defined values */ RT_SCOPE_SITE=200, RT_SCOPE_LINK=253, RT_SCOPE_HOST=254, RT_SCOPE_NOWHERE=255 }; /* rtm_flags */ #define RTM_F_NOTIFY 0x100 /* Notify user of route change */ #define RTM_F_CLONED 0x200 /* This route is cloned */ #de BPF_MAP_*_BATCH commands */ __aligned_u64 in_batch; /* start batch, * NULL to start from beginning */ __aligned_u64 out_batch; /* output: next start batch */ __aligned_u64 keys; __aligned_u64 values; __u32 count; /* input/output: * input: # of key/value * elements * output: # of filled elements */ __u32 map_fd; __u64 elem_flags; __u64 flags; } batch; struct { /* anonymous struct used by BPF_PROG_LOAD command */ __u32 prog_type; /* one of enum bpf_prog_type */ _* * LIRC device path (eg /dev/lircN). Requires the kernel * to be compiled with **CONFIG_BPF_LIRC_MODE2**. * * **BPF_PROG_TYPE_SK_SKB**, * **BPF_PROG_TYPE_SK_MSG** * * eBPF map of socket type (eg **BPF_MAP_TYPE_SOCKHASH**). * * Return * Returns zero on success. On error, -1 is returned and *errno* * is set appropriately. * * BPF_PROG_DETACH * Description * Detach the eBPF program associated with the *target_fd* at the * hook specified by *attach_type*. The program must have been * previously attached u: 16 byte value representing software identity * @signature: 32 byte signature created by software using a previous nonce */ struct dbc_user_setuid { __u8 uid[DBC_UID_SIZE]; __u8 signature[DBC_SIG_SIZE]; } __attribute__((packed)); /** * struct dbc_user_param - Parameter exchange structure (input/output). * @msg_index: Message indicating what parameter to set or get (input) * @param: 4 byte parameter, units are message specific. (input/output) * @signature: 32 byte signature. * - When sending a messag_bytes[BR_MCAST_DIR_SIZE]; __u64 mcast_packets[BR_MCAST_DIR_SIZE]; }; /* bridge boolean options * BR_BOOLOPT_NO_LL_LEARN - disable learning from link-local packets * BR_BOOLOPT_MCAST_VLAN_SNOOPING - control vlan multicast snooping * BR_BOOLOPT_FDB_LOCAL_VLAN_0 - local FDB entries installed by the bridge * driver itself should only be added on VLAN 0 * * IMPORTANT: if adding a new option do not forget to handle * it in br_boolopt_toggle/get and bridge sysfs */ enum br_boolopt_id { addr[ETH_ALEN]; __u8 port_no; __u8 is_local; __u32 ageing_timer_value; __u8 port_hi; __u8 pad0; __u16 unused; }; /* Bridge Flags */ #define BRIDGE_FLAGS_MASTER 1 /* Bridge command to/from master */ #define BRIDGE_FLAGS_SELF 2 /* Bridge command to/from lowerdev */ #define BRIDGE_MODE_VEB 0 /* Default loopback mode */ #define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ #define BRIDGE_MODE_UNDEF 0xFFFF /* mode undefined */ /* Bridge management nested attributes * [IFLA_AF_SPEC] = { * [IFLA_BRIDGE_FLAGS] * ine MEDIA_ENT_F_DTV_DECODER MEDIA_ENT_F_DV_DECODER /* * There is still no full ALSA support in the media controller. These * defines should not have been added and we leave them here only * in case some application tries to use these defines. * * The ALSA defines that are in use have been moved into __KERNEL__ * scope. As support gets added to these interface types, they should * be moved into __KERNEL__ scope with the code that uses them. */ #define MEDIA_INTF_T_ALSA_COMPRESS (MEDIA_INTF_T_ALSA_BASE + 3) #de; /* element access right bit map (1 << VIRTIO_SND_CTL_ACCESS_XXX) */ __le32 access; /* # of members in the element value */ __le32 count; /* index for an element with a non-unique name */ __le32 index; /* name identifier string for the element */ __u8 name[44]; /* additional information about the element's value */ union { /* VIRTIO_SND_CTL_TYPE_INTEGER */ struct { /* minimum supported value */ __le32 min; /* maximum supported value */ __le32 max; /* fixed step size for value (0 = variable size) */ indexes set to this value in the fd table */ #define IORING_REGISTER_FILES_SKIP (-2) #define IO_URING_OP_SUPPORTED (1U << 0) struct io_uring_probe_op { __u8 op; __u8 resv; __u16 flags; /* IO_URING_OP_* flags */ __u32 resv2; }; struct io_uring_probe { __u8 last_op; /* last opcode supported */ __u8 ops_len; /* length of ops[] array below */ __u16 resv; __u32 resv2[3]; struct io_uring_probe_op ops[]; }; struct io_uring_restriction { __u16 opcode; union { __u8 register_op; /* IORING_RESTRICTION_REGISTER_OP */ __u8 sL flag set. On return, * @fs.@location is the actual rule location. If @fs.@flow_type * includes the %FLOW_RSS flag, @rss_context is the RSS context ID to * use for flow spreading traffic which matches this rule. The value * from the rxfh indirection table will be added to @fs.@ring_cookie * to choose which ring to deliver to. * * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an * existing rule on entry. * * A driver supporting the special location values for * %ETHTOOL_SRXCLSRLINS may add the ruleN_CONFIG_CHANGE: Configuration * change * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over * temperature detected * * error_condition is a variable indicating the status of * implementation-specific fault conditions or optionally other system faults * that prevent the PSE from meeting the specifications in Table 33–11 and that * require the PSE not to source power. These error conditions are different * from those monitored by the state diagrams in Figure 33–10. */ enum ethtool_c33_pse_ext_substaadvertised * pause frame capabilities to be controlled directly through the * advertising field of &struct ethtool_cmd. * * If @autoneg is non-zero, the MAC is configured to send and/or * receive pause frames according to the result of autonegotiation. * Otherwise, it is configured directly based on the @rx_pause and * @tx_pause flags. */ struct ethtool_pauseparam { __u32 cmd; __u32 autoneg; __u32 rx_pause; __u32 tx_pause; }; /* Link extended state */ enum ethtool_link_ext_state { ETHTOOL_LINK_EXT_STATE_AUTONEG, ETHTed by a different field in the future. They must * be initialized to zero before making the request, e.g. via memset * of the entire structure or implicitly by not being set in a structure * initializer. */ /** * struct ethtool_cmd - DEPRECATED, link control and status * This structure is DEPRECATED, please use struct ethtool_link_settings. * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET * @supported: Bitmask of %SUPPORTED_* flags for the link modes, * physical connectors and other link features for which the * iats; }; struct tc_sfq_xstats { __s32 allot; }; /* RED section */ enum { TCA_RED_UNSPEC, TCA_RED_PARMS, TCA_RED_STAB, TCA_RED_MAX_P, TCA_RED_FLAGS, /* bitfield32 */ TCA_RED_EARLY_DROP_BLOCK, /* u32 */ TCA_RED_MARK_BLOCK, /* u32 */ __TCA_RED_MAX, }; #define TCA_RED_MAX (__TCA_RED_MAX - 1) struct tc_red_qopt { __u32 limit; /* HARD maximal queue length (bytes) */ __u32 qth_min; /* Min average length threshold (bytes) */ __u32 qth_max; /* Max average length threshold (bytes) */ unsigned char Wlog; /* log(W) e { V4L2_SUBDEV_FORMAT_TRY = 0, V4L2_SUBDEV_FORMAT_ACTIVE = 1, }; /** * struct v4l2_subdev_format - Pad-level media bus format * @which: format type (from enum v4l2_subdev_format_whence) * @pad: pad number, as reported by the media API * @format: media bus format (format code and frame size) * @stream: stream number, defined in subdev routing * @reserved: drivers and applications must zero this array */ struct v4l2_subdev_format { __u32 which; __u32 pad; struct v4l2_mbus_framefmt format; __u32 stream; __u32 reserved[MD_IEEE_DEL, __DCB_CMD_ENUM_MAX, DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1, }; /** * enum dcbnl_attrs - DCB top-level netlink attributes * * @DCB_ATTR_UNDEFINED: unspecified attribute to catch errors * @DCB_ATTR_IFNAME: interface name of the underlying device (NLA_STRING) * @DCB_ATTR_STATE: enable state of DCB in the device (NLA_U8) * @DCB_ATTR_PFC_STATE: enable state of PFC in the device (NLA_U8) * @DCB_ATTR_PFC_CFG: priority flow control configuration (NLA_NESTED) * @DCB_ATTR_NUM_TC: number of traffic classes supported in nsaction abort */ cycles : 16, /* cycle count to last branch */ type : 4, /* branch type */ spec : 2, /* branch speculation info */ new_type : 4, /* additional branch type */ priv : 3, /* privilege level */ reserved : 31; }; /* Size of used info bits in struct perf_branch_entry */ #define PERF_BRANCH_ENTRY_INFO_BITS_MAX 33 union perf_sample_weight { __u64 full; #if defined(__LITTLE_ENDIAN_BITFIELD) struct { __u32 var1_dw; __u16 var2_w; __u16 var3_w; }; #elif defined(__BIG_ENDIANtecture-specific hardware ID. * This records the hardware ID, but requires sample_id to provide the * event ID. e.g. Intel PT uses this record to disambiguate PEBS-via-PT * records from multiple events. * * struct { * struct perf_event_header header; * u64 hw_id; * struct sample_id sample_id; * }; */ PERF_RECORD_AUX_OUTPUT_HW_ID = 21, /* * This user callchain capture was deferred until shortly before * returning to user space. Previous samples would have kernel * callchains only and they need to b PERF_SAMPLE_BRANCH_HV) /* * Values to determine ABI of the registers dump. */ enum perf_sample_regs_abi { PERF_SAMPLE_REGS_ABI_NONE = 0, PERF_SAMPLE_REGS_ABI_32 = 1, PERF_SAMPLE_REGS_ABI_64 = 2, }; /* * Values for the memory transaction event qualifier, mostly for * abort events. Multiple bits can be set. */ enum { PERF_TXN_ELISION = (1 << 0), /* From elision */ PERF_TXN_TRANSACTION = (1 << 1), /* From transaction */ PERF_TXN_SYNC = (1 << 2), /* Instruction is related */ PERF_TXN_ASYNC = (1 << 3), /*N_COUNT, }; /** * struct mshv_create_partition - arguments for MSHV_CREATE_PARTITION * @pt_flags: Bitmask of 1 << MSHV_PT_BIT_* * @pt_isolation: MSHV_PT_ISOLATION_* * * This is the initial/v1 version for backward compatibility. * * Returns a file descriptor to act as a handle to a guest partition. * At this point the partition is not yet initialized in the hypervisor. * Some operations must be done with the partition in this state, e.g. setting * so-called "early" partition properties. The partition can then be * initia010 /* Completion Timeout Disable */ #define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ #define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040 /* Set Atomic requests */ #define PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK 0x0080 /* Block atomic egress */ #define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */ #define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */ #define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */ #define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type EXT 1 /* Next capability in the list */ #define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ #define PCI_CAP_SIZEOF 4 /* Power Management Registers */ #define PCI_PM_PMC 2 /* PM Capabilities Register */ #define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ #define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ #define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ #define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ #define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */ #de session. This allows internal resources to be freed, * typically by decrementing reference counts on the underlying preserved * objects. * * If this operation fails, the resources remain preserved in memory. Userspace * may attempt to call finish again. The resources will otherwise be reset * during the next live update cycle. * * Return: 0 on success, negative error code on failure. */ struct liveupdate_session_finish { __u32 size; __u32 reserved; }; #define LIVEUPDATE_SESSION_FINISH \ _IO(LIVEUPDATE_IOCTL_TYPEHTTOOL_A_CABLE_STEP */ ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE, /* nest - ETHTOOL_A_CABLE_AMPLITUDE */ ETHTOOL_A_CABLE_TDR_NEST_PULSE, /* nest - ETHTOOL_A_CABLE_PULSE */ __ETHTOOL_A_CABLE_TDR_NEST_CNT, ETHTOOL_A_CABLE_TDR_NEST_MAX = (__ETHTOOL_A_CABLE_TDR_NEST_CNT - 1) }; enum { ETHTOOL_STATS_ETH_PHY, ETHTOOL_STATS_ETH_MAC, ETHTOOL_STATS_ETH_CTRL, ETHTOOL_STATS_RMON, ETHTOOL_STATS_PHY, /* add new constants above here */ __ETHTOOL_STATS_CNT }; enum { /* 30.3.2.1.5 aSymbolErrorDuringCarrier */ ETHTOOL_A_STATS_ETH_PHY_5_Sbba1974 #define EXT4_SUPER_MAGIC 0xEF53 #define BTRFS_SUPER_MAGIC 0x9123683E #define NILFS_SUPER_MAGIC 0x3434 #define F2FS_SUPER_MAGIC 0xF2F52010 #define HPFS_SUPER_MAGIC 0xf995e849 #define ISOFS_SUPER_MAGIC 0x9660 #define JFFS2_SUPER_MAGIC 0x72b6 #define XFS_SUPER_MAGIC 0x58465342 /* "XFSB" */ #define PSTOREFS_MAGIC 0x6165676C #define EFIVARFS_MAGIC 0xde5e81e4 #define HOSTFS_SUPER_MAGIC 0x00c0ffee #define OVERLAYFS_SUPER_MAGIC 0x794c7630 #define FUSE_SUPER_MAGIC 0x65735546 #define BCACHEFS_SUPER_MAGIC 0xca451a4e #define MINIX_RT_FLAGS_V4ROOT = 65536, NFSD_EXPORT_FLAGS_PNFS = 131072, }; /* * These flags are ordered to match the NFSEXP_XPRTSEC_* flags in * include/linux/nfsd/export.h */ enum nfsd_xprtsec_mode { NFSD_XPRTSEC_MODE_NONE = 1, NFSD_XPRTSEC_MODE_TLS = 2, NFSD_XPRTSEC_MODE_MTLS = 4, }; enum { NFSD_A_CACHE_NOTIFY_CACHE_TYPE = 1, __NFSD_A_CACHE_NOTIFY_MAX, NFSD_A_CACHE_NOTIFY_MAX = (__NFSD_A_CACHE_NOTIFY_MAX - 1) }; enum { NFSD_A_RPC_STATUS_XID = 1, NFSD_A_RPC_STATUS_FLAGS, NFSD_A_RPC_STATUS_PROG, NFSD_A_RPC_STATUS_VERSION, NFSDader: Header and payload in case of a transmit context. * * &struct fw_cdev_iso_packet is used to describe isochronous packet queues. * Use the FW_CDEV_ISO_* macros to fill in @control. * The @header array is empty in case of receive contexts. * * Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT: * * @control.HEADER_LENGTH must be a multiple of 4. It specifies the numbers of * bytes in @header that will be prepended to the packet's payload. These bytes * are copied into the kernel and will not be accessed after the ioctl has _resource) #define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource) #define FW_CDEV_IOC_GET_SPEED _IO('#', 0x11) /* returns speed code */ #define FW_CDEV_IOC_SEND_BROADCAST_REQUEST _IOW('#', 0x12, struct fw_cdev_send_request) #define FW_CDEV_IOC_SEND_STREAM_PACKET _IOW('#', 0x13, struct fw_cdev_send_stream_packet) /* available since kernel version 2.6.34 */ #define FW_CDEV_IOC_GET_CYCLE_TIMER2 _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2) /* au32 padding; __u32 data[]; }; /** * struct fw_cdev_event_request - Old version of &fw_cdev_event_request2 * @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl * @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST * @tcode: Transaction code of the incoming request * @offset: The offset into the 48-bit per-node address space * @handle: Reference to the kernel-side pending request * @length: Data length, i.e. the request's payload size in bytes * @data: Incoming data, if any * * This event is started. * * Context: Process context. * Return: * * 0 - Logic successfully completed. * * -1 - There was a failure in the ioctl logic. * On failure, errno is set to: * * EFAULT - copy_from_user() / copy_to_user() failure. * * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state (init = * before being started). * * NE_ERR_INVALID_FLAG_VALUE - The value of the provided flag is invalid. */ #define NE_GET_IMAGE_LOAD_INFO _IOWR(0xAE, 0x22, struct ne_image_load_info) /** * NE_SET_USER_MEMORY_REGION #define ZORRO_MANUF_MARC_MICHAEL_GROTH 0x0439 #define ZORRO_MANUF_M_TECH 0x0502 #define ZORRO_PROD_MTEC_AT500_1 ZORRO_ID(M_TECH, 0x03, 0) #define ZORRO_MANUF_GREAT_VALLEY_PRODUCTS_1 0x06E1 #define ZORRO_PROD_GVP_IMPACT_SERIES_I ZORRO_ID(GREAT_VALLEY_PRODUCTS_1, 0x08, 0) #define ZORRO_MANUF_BYTEBOX 0x07DA #define ZORRO_PROD_BYTEBOX_A500 ZORRO_ID(BYTEBOX, 0x00, 0) #define ZORRO_MANUF_DKB_POWER_COMPUTING 0x07DC #define ZORRO_PROD_DKB_POWER_COMPUTING_SECUREKEY ZORRO_ID(DKB_POWER_COMPUTING, 0x09, 0) #deSACTION, NFC_CMD_GET_SE, NFC_CMD_SE_IO, NFC_CMD_ACTIVATE_TARGET, NFC_CMD_VENDOR, NFC_CMD_DEACTIVATE_TARGET, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; #define NFC_CMD_MAX (__NFC_CMD_AFTER_LAST - 1) /** * enum nfc_attrs - supported nfc attributes * * @NFC_ATTR_UNSPEC: unspecified attribute * * @NFC_ATTR_DEVICE_INDEX: index of nfc device * @NFC_ATTR_DEVICE_NAME: device name, max 8 chars * @NFC_ATTR_PROTOCOLS: nfc protocols - bitwise or-ed combination from * NFC_PROTO_*_MASK constants * @NFC_ATTR_TARGET_I` * @config: Lens Shading Correction configuration, see * :c:type:`rkisp1_cif_isp_lsc_config` */ struct rkisp1_ext_params_lsc_config { struct rkisp1_ext_params_block_header header; struct rkisp1_cif_isp_lsc_config config; } __attribute__((aligned(8))); /** * struct rkisp1_ext_params_awb_gain_config - RkISP1 extensible params AWB * gain config * * RkISP1 extensible parameters Auto-White Balance Gains configuration block. * Identified by :c:type:`RKISP1_EXT_PARAMS_BLOCK_TYPE_AWB_GAIN`. * * @header: The RkISC_MODE_LOGARITHMIC, RKISP1_CIF_ISP_GOC_MODE_EQUIDISTANT }; /** * struct rkisp1_cif_isp_goc_config - Configuration used by Gamma Out correction * * @mode: goc mode (from enum rkisp1_cif_isp_goc_mode) * @gamma_y: gamma out curve y-axis for all color components * * The number of entries of @gamma_y depends on the hardware revision * as is reported by the hw_revision field of the struct media_device_info * that is returned by ioctl MEDIA_IOC_DEVICE_INFO. * * V10 has RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES_V10 entries, V12 has Base Page ability register [47:32] */ #define MDIO_AN_10BT1_AN_CTRL 526 /* 10BASE-T1 AN control register */ #define MDIO_AN_10BT1_AN_STAT 527 /* 10BASE-T1 AN status register */ #define MDIO_PMA_PMD_BT1_CTRL 2100 /* BASE-T1 PMA/PMD control register */ #define MDIO_PCS_1000BT1_CTRL 2304 /* 1000BASE-T1 PCS control register */ #define MDIO_PCS_1000BT1_STAT 2305 /* 1000BASE-T1 PCS status register */ /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ #define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ #de * * DLM_LKF_FORCEUNLOCK * * Unlock the lock even if it is converting or waiting or has sublocks. * Only really for use by the userland device.c code. * * DLM_LKF_TIMEOUT * * This value is deprecated and reserved. DO NOT USE! * */ #define DLM_LKF_NOQUEUE 0x00000001 #define DLM_LKF_CANCEL 0x00000002 #define DLM_LKF_CONVERT 0x00000004 #define DLM_LKF_VALBLK 0x00000008 #define DLM_LKF_QUECVT 0x00000010 #define DLM_LKF_IVVALBLK 0x00000020 #define DLM_LKF_CONVDEADLK 0x00000040 #define DLM_LKF_PERSISTENT 0x00000080 #defite) OR BSD-3-Clause) */ /* Do not edit directly, auto-generated from: */ /* Documentation/netlink/specs/net_shaper.yaml */ /* YNL-GEN uapi header */ /* To regenerate run: tools/net/ynl/ynl-regen.sh */ #ifndef _LINUX_NET_SHAPER_H #define _LINUX_NET_SHAPER_H #define NET_SHAPER_FAMILY_NAME "net-shaper" #define NET_SHAPER_FAMILY_VERSION 1 /** * enum net_shaper_scope - Defines the shaper @id interpretation. * @NET_SHAPER_SCOPE_UNSPEC: The scope is not specified. * @NET_SHAPER_SCOPE_NETDEV: The main shaper for the given network dete it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #ifndef _LINUX_SEG6_H #define _LINUX_SEG6_H #include #include /* For struct in6_addr. */ /* * SRH */ struct ipv6_sr_hdr { __u8 nexthdr; __u8 hdrlen; __u8 type; __u8 segments_left; __u8 first_segment; /* Represents the last_entry field of SRH */ __u8 flags; __u16 tag; struc, 0, 0, 1, 0), \ _SEG14('}', 1, 0, 0, 1, 0, 0, 0, 1, 0, 0, 1, 0, 0, 1), \ _SEG14('~', 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 1, 0, 0), /* Maps */ #define MAP_ASCII14SEG_ALPHANUM \ _MAP_0_32_ASCII_SEG14_NON_PRINTABLE \ _MAP_33_47_ASCII_SEG14_SYMBOL \ _MAP_48_57_ASCII_SEG14_NUMERIC \ _MAP_58_64_ASCII_SEG14_SYMBOL \ _MAP_65_90_ASCII_SEG14_ALPHA_UPPER \ _MAP_91_96_ASCII_SEG14_SYMBOL \ _MAP_97_122_ASCII_SEG14_ALPHA_LOWER \ _MAP_123_126_ASCII_SEG14_SYMBOL #define SEG14_DEFAULT_MAP(_name) \ SEG14_CONVERSION_MAP(_name, MAP_ASdefine SC_DEBUG 0x00010000 /* enable debug messages */ #define SC_LOG_INPKT 0x00020000 /* log contents of good pkts recvd */ #define SC_LOG_OUTPKT 0x00040000 /* log contents of pkts sent */ #define SC_LOG_RAWIN 0x00080000 /* log all chars received */ #define SC_LOG_FLUSH 0x00100000 /* log all chars flushed */ #define SC_SYNC 0x00200000 /* synchronous serial mode */ #define SC_MUST_COMP 0x00400000 /* no uncompressed packets may be sent or received */ #define SC_MASK 0x0f600fff /* bits that user can change */ /* state bits */ #IO, 0x24, \ struct vhost_vring_state) /* Set or get vhost backend capability */ #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64) #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64) /* VHOST_NET specific defines */ /* Attach virtio net ring to a raw socket, or tap device. * The socket must be already bound to an ethernet device, this device will be * used for transmit. Pass fd -1 to unbind from the socket and the transmit * device. This can be used to stop the ring (e.g. for migration)ence; /* memory location */ __u32 memory; union { __u32 offset; unsigned long userptr; struct v4l2_plane *planes; __s32 fd; } m; __u32 length; __u32 reserved2; union { __s32 request_fd; __u32 reserved; }; }; /** * v4l2_timeval_to_ns - Convert timeval to nanoseconds * @tv: pointer to the timeval variable to be converted * * Returns the scalar nanosecond representation of the timeval * parameter. */ static __inline__ __u64 v4l2_timeval_to_ns(const struct timeval *tv) { return (__u64) ycbcr_enc; /* enum v4l2_hsv_encoding */ __u32 hsv_enc; }; __u32 quantization; /* enum v4l2_quantization */ __u32 xfer_func; /* enum v4l2_xfer_func */ }; /* Pixel format FOURCC depth Description */ /* RGB formats (1 or 2 bytes per pixel) */ #define V4L2_PIX_FMT_RGB332 v4l2_fourcc('R', 'G', 'B', '1') /* 8 RGB-3-3-2 */ #define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ #define V4L2_PIX_FMT_ARGB444 v4l2_fourcc('A', 'R', '1', '2') /* 1s as there can be holes * * Structure used to get TPMI instances information using * IOCTL ISST_IF_COUNT_TPMI_INSTANCES. */ struct isst_tpmi_instance_count { __u8 socket_id; __u8 count; __u16 valid_mask; }; /** * struct isst_perf_level_info - Structure to get information on SST-PP levels * @socket_id: Socket/package id * @power_domain_id: Power Domain id * @logical_cpu: CPU number * @clos: Clos ID to assign to the logical CPU * @max_level: Maximum performance level supported by the platform * @feature_rev: The featur /* * Platform Firmware Runtime Update header * * Copyright(c) 2021 Intel Corporation. All rights reserved. */ #ifndef __PFRUT_H__ #define __PFRUT_H__ #include #include #define PFRUT_IOCTL_MAGIC 0xEE /** * PFRU_IOC_SET_REV - _IOW(PFRUT_IOCTL_MAGIC, 0x01, unsigned int) * * Return: * * 0 - success * * -EFAULT - fail to read the revision id * * -EINVAL - user provides an invalid revision id * * Set the Revision ID for Platform Firmware Runtime Update. */ #define PFRU_IOC_SET_REV _IOWx.mode) */ #define ADJ_OFFSET 0x0001 /* time offset */ #define ADJ_FREQUENCY 0x0002 /* frequency offset */ #define ADJ_MAXERROR 0x0004 /* maximum time error */ #define ADJ_ESTERROR 0x0008 /* estimated time error */ #define ADJ_STATUS 0x0010 /* clock status */ #define ADJ_TIMECONST 0x0020 /* pll time constant */ #define ADJ_TAI 0x0080 /* set TAI offset */ #define ADJ_SETOFFSET 0x0100 /* add 'time' to current time */ #define ADJ_MICRO 0x1000 /* select microsecond resolution */ #define ADJ_NANO 0x2000 /* select nanosecondtisfy requests for the indirect symbol, but not vice versa. If the other symbol does not have a definition, libraries will be searched to find a definition. */ #define N_INDR 0xa /* The following symbols refer to set elements. All the N_SET[ATDB] symbols with the same name form one set. Space is allocated for the set in the text section, and each set element's value is stored into one word of the space. The first word of the space is the length of the set (number of elements). The address of the set is made C_MSG_CDC_MESSAGE; /* msg[2] and msg[3] (phys_addr) are filled in by the CEC framework */ msg->msg[4] = CEC_MSG_CDC_HEC_REPORT_STATE; msg->msg[5] = target_phys_addr >> 8; msg->msg[6] = target_phys_addr & 0xff; msg->msg[7] = (hec_func_state << 6) | (host_func_state << 4) | (enc_func_state << 2) | cdc_errcode; if (has_field) { msg->msg[8] = hec_field >> 8; msg->msg[9] = hec_field & 0xff; } } static __inline__ void cec_ops_cdc_hec_report_state(const struct cec_msg *msg, __u16 *phys_addr, ana_bcast_type = msg->msg[3]; tuner_dev_info->analog.ana_freq = (msg->msg[4] << 8) | msg->msg[5]; tuner_dev_info->analog.bcast_system = msg->msg[6]; return; } cec_get_digital_service_id(msg->msg + 3, &tuner_dev_info->digital); } static __inline__ void cec_msg_give_tuner_device_status(struct cec_msg *msg, int reply, __u8 status_req) { msg->len = 3; msg->msg[1] = CEC_MSG_GIVE_TUNER_DEVICE_STATUS; msg->msg[2] = status_req; msg->reply = (reply && status_req != CEC_OP_STATUS_REQ_OFF) ? CEC_MSG_TUNER_ >> 8; msg->msg[3] = phys_addr & 0xff; } static __inline__ void cec_ops_inactive_source(const struct cec_msg *msg, __u16 *phys_addr) { *phys_addr = (msg->msg[2] << 8) | msg->msg[3]; } static __inline__ void cec_msg_request_active_source(struct cec_msg *msg, int reply) { msg->len = 2; msg->msg[0] |= CEC_LOG_ADDR_BROADCAST; msg->msg[1] = CEC_MSG_REQUEST_ACTIVE_SOURCE; msg->reply = reply ? CEC_MSG_ACTIVE_SOURCE : 0; } static __inline__ void cec_msg_routing_information(struct cec_msg *msg, __u16 physC_UYVY_JPEG_1X8), V4L2_MBUS_FROM_MEDIA_BUS_FMT(AHSV8888_1X32), }; #endif /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. * * Definitions of the socket-level I/O control calls. * * Version: @(#)sockios.h 1.0.2 03/09/93 * * Authors: Ross Biro * Fred N. van Kempen, * * This pr 0x24, struct ublksrv_io_cmd) /* * return 0 if the command is run successfully, otherwise failure code * is returned */ #define UBLK_U_IO_PREP_IO_CMDS \ _IOWR('u', 0x25, struct ublk_batch_io) /* * If failure code is returned, nothing in the command buffer is handled. * Otherwise, the returned value means how many bytes in command buffer * are handled actually, then number of handled IOs can be calculated with * `elem_bytes` for each IO. IOs in the remained bytes are not committed, * userspace has to check return value forc windows into the ASPEED BMC's memory. * * A user can map a region of the BMC's memory as read-only or read-write, with * the caveat that once any region is mapped, all regions are unlocked for * reading. */ /* * Unlock a region of BMC physical memory for access from the host. * * Also used to read back the optional memory-region configuration for the * driver. */ struct aspeed_p2a_ctrl_mapping { __u64 addr; __u32 length; __u32 flags; }; #define __ASPEED_P2A_CTRL_IOCTL_MAGIC 0xb3 /* * This IOCTL is meant to configto append extra information ... */ }; struct rxgk_challenge { struct rxrpc_challenge base; __u32 enctype; /* Krb5 encoding type */ }; #endif /* _LINUX_RXRPC_H */ #ifndef _VIRTIO_CRYPTO_H #define _VIRTIO_CRYPTO_H /* This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the abCT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _LINUX_TIPC_NETLINK_H_ #define _LINUX_TIPC_NETLINK_H_ #define TIPC_t was determined at constructor time. * It is returned in the payload area and 'data_size' is set to * reflect this. * * When the request has been processed, user-space must return the * dm_ulog_request to the kernel - setting the 'error' field appropriately. */ #define DM_ULOG_GET_REGION_SIZE 6 /* * DM_ULOG_IS_CLEAN corresponds to (found in dm-dirty-log.h): * int (*is_clean)(struct dm_dirty_log *log, region_t region); * * Payload-to-userspace: * __u64 - the region to get clean status on * Payload-to-kernel: * uely identify the request. * This command is also used as an event to notify when a requested * remain-on-channel duration has expired. * * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface * and @NL80211_ATTR_TX_RATES the set of allowed rates. * * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames * (via @NL80211_CMD_FRAME) for processing in userspace. This command * requires an interface index, a frame ty, define which channels should be scanned; if not * passed, all channels allowed for the current regulatory domain * are used. Extra IEs can also be passed from the userspace by * using the %NL80211_ATTR_IE attribute. The first cycle of the * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY * is supplied. If the device supports multiple concurrent scheduled * scans, it will allow such when the caller provides the flag attribute * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. * @NL802 of packet patterns which needs to be matched * c) Condition for coalescence: pattern 'match' or 'no match' * Multiple such rules can be created. */ /** * DOC: WPA/WPA2 EAPOL handshake offload * * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers * can indicate they support offloading EAPOL handshakes for WPA/WPA2 * preshared key authentication in station mode. In %NL80211_CMD_CONNECT * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers * supporting this offload may reject the %NL802 instruction sequence block, as well as when the kernel detects that * it is preempting or delivering a signal outside of the range * targeted by the rseq_cs. Also needs to be set to NULL by user-space * before reclaiming memory that contains the targeted struct rseq_cs. * * Read and set by the kernel. Set by user-space with single-copy * atomicity semantics. This field should only be updated by the * thread which registered this data structure. Aligned on 64-bit. * * 32-bit architectures should update the low ord#define LINK_XSTATS_TYPE_MAX (__LINK_XSTATS_TYPE_MAX - 1) /* These are stats embedded into IFLA_STATS_LINK_OFFLOAD_XSTATS */ enum { IFLA_OFFLOAD_XSTATS_UNSPEC, IFLA_OFFLOAD_XSTATS_CPU_HIT, /* struct rtnl_link_stats64 */ IFLA_OFFLOAD_XSTATS_HW_S_INFO, /* HW stats info. A nest */ IFLA_OFFLOAD_XSTATS_L3_STATS, /* struct rtnl_hw_stats64 */ __IFLA_OFFLOAD_XSTATS_MAX }; #define IFLA_OFFLOAD_XSTATS_MAX (__IFLA_OFFLOAD_XSTATS_MAX - 1) enum { IFLA_OFFLOAD_XSTATS_HW_S_INFO_UNSPEC, IFLA_OFFLOAD_XSTATS_HW_S_INFO_REQUEST, /* u8 */ IF is enabled for a given port. * When *IFLA_BRPORT_NEIGH_VLAN_SUPPRESS* is set, this port-level flag is * ignored and per-VLAN control is available via * *BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT*. * * @IFLA_BRPORT_BACKUP_NHID * The FDB nexthop object ID to attach to packets being redirected to a * backup port that has VLAN tunnel mapping enabled (via the * *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has * the effect of not attaching any ID. */ enum { IFLA_BRPORT_UNSPEC, IFLA_BRPORT_STAT resources. * * @multicast: Multicast packets received. * For hardware interfaces this statistic is commonly calculated * at the device level (unlike @rx_packets) and therefore may include * packets which did not reach the host. * * For IEEE 802.3 devices this counter may be equivalent to: * * - 30.3.1.1.21 aMulticastFramesReceivedOK * * @collisions: Number of collisions during packet transmissions. * * @rx_length_errors: Number of packets dropped due to invalid length. * Part of aggregate "frame" errors n indication that blocks have not * been written */ BTRFS_DEV_STAT_VALUES_MAX }; /* Reset statistics after reading; needs SYS_ADMIN capability */ #define BTRFS_DEV_STATS_RESET (1ULL << 0) struct btrfs_ioctl_get_dev_stats { __u64 devid; /* in */ __u64 nr_items; /* in/out */ __u64 flags; /* in/out */ /* out values: */ __u64 values[BTRFS_DEV_STAT_VALUES_MAX]; /* * This pads the struct to 1032 bytes. It was originally meant to pad to * 1024 bytes, but when adding the flags field, the padding calculation LL << 16) #define BTRFS_FEATURE_INCOMPAT_REMAP_TREE (1ULL << 17) struct btrfs_ioctl_feature_flags { __u64 compat_flags; __u64 compat_ro_flags; __u64 incompat_flags; }; /* balance control ioctl modes */ #define BTRFS_BALANCE_CTL_PAUSE 1 #define BTRFS_BALANCE_CTL_CANCEL 2 /* * this is packed, because it should be exactly the same as its disk * byte order counterpart (struct btrfs_disk_balance_args) */ struct btrfs_balance_args { __u64 profiles; /* * usage filter * BTRFS_BALANCE_ARGS_USAGE with a single value means '0anty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef __UAPI_MAX2175_H_ #define __UAPI_MAX2175_H_ #include #define V4L2_CID_MAX2175_I2S_ENABLE (V4L2_CID_USER_MAX217X_BASE + 0x01) #define V4L2_CID_MAX2175_HSLS (V4L2_CID_USER_MAX217X_BASE + 0x02) #define V4L2_CID_MAX2175_RX_MODE (V4L2_CID_USER_MAX217X_BASE + 0x03) #endif /* __UAPI_MAX2175_H_ */ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef __LINUX_IF_ADD_addr: protocol specific address information * @l2tp_conn_id: connection id of tunnel */ #define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ struct sockaddr_l2tpip { /* The first fields must match struct sockaddr_in */ __kernel_sa_family_t l2tp_family; /* AF_INET */ __be16 l2tp_unused; /* INET port number (unused) */ struct in_addr l2tp_addr; /* Internet address */ __u32 l2tp_conn_id; /* Connection ID of tunnel */ /* Pad to size of `struct sockaddr'. */ unsigned char __pad[__SOCK_SIZE__ - sizeof(__kernene VIRTIO_BT_F_CONFIG_V2 3 /* Use second version configuration */ enum virtio_bt_config_type { VIRTIO_BT_CONFIG_TYPE_PRIMARY = 0, }; enum virtio_bt_config_vendor { VIRTIO_BT_CONFIG_VENDOR_NONE = 0, VIRTIO_BT_CONFIG_VENDOR_ZEPHYR = 1, VIRTIO_BT_CONFIG_VENDOR_INTEL = 2, VIRTIO_BT_CONFIG_VENDOR_REALTEK = 3, }; struct virtio_bt_config { __u8 type; __u16 vendor; __u16 msft_opcode; } __attribute__((packed)); struct virtio_bt_config_v2 { __u8 type; __u8 alignment; __u16 vendor; __u16 msft_opcode; }; #endif /* _LINUX_VIibutions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of IBM nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOte_arg { __u32 trace_mode; /* KCOV_TRACE_PC or KCOV_TRACE_CMP */ __u32 area_size; /* Length of coverage buffer in words */ __u32 num_handles; /* Size of handles array */ __aligned_u64 common_handle; __aligned_u64 handles[]; }; #define KCOV_REMOTE_MAX_HANDLES 0x100 #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define KCOV_REMOTE_ENABLE _IOW('c', 102, struct kcov_remote_arg) enum { /* * Tracing coverage collection mode. * Covered PCs ally. Otherwise, the event is filtered and will never be queued on * the client's receive buffer. * * Event masks do not affect global state of the input device. They only * affect the file descriptor they are applied to. * * The default event mask for a client has all bits set, i.e. all events * are forwarded to the client. If the kernel is queried for an unknown * event type or if the receive buffer is larger than the number of * event codes known to the kernel, the kernel returns all zeroes for those * codes. * * At m2 size; /* length in bytes */ __u32 flags; /* feature flags */ __u32 future; /* reserved for future use */ __u8 signature[16]; /* "Compressed ROMFS" */ struct cramfs_info fsid; /* unique filesystem info */ __u8 name[16]; /* user-defined name */ struct cramfs_inode root; /* root inode data */ }; /* * Feature flags * * 0x00000000 - 0x000000ff: features that work for all past kernels * 0x00000100 - 0xffffffff: features that don't work for past kernels */ #define CRAMFS_FLAG_FSID_VERSION_2 0x00000001 /* fsid versiory) and balance item fields * (on-disk). The corresponding on-disk bit in chunk.type is reserved * to avoid remappings between two formats in future. */ #define BTRFS_AVAIL_ALLOC_BIT_SINGLE (1ULL << 48) /* * A fake block group type that is used to communicate global block reserve * size to userspace via the SPACE_INFO ioctl. */ #define BTRFS_SPACE_INFO_GLOBAL_RSV (1ULL << 49) #define BTRFS_EXTENDED_PROFILE_MASK (BTRFS_BLOCK_GROUP_PROFILE_MASK | \ BTRFS_AVAIL_ALLOC_BIT_SINGLE) static __inline__ __u64 chunk_to_extende; __le16 name_len; __u8 type; } __attribute__ ((__packed__)); #define BTRFS_ROOT_SUBVOL_RDONLY (1ULL << 0) /* * Internal in-memory flag that a subvolume has been marked for deletion but * still visible as a directory */ #define BTRFS_ROOT_SUBVOL_DEAD (1ULL << 48) struct btrfs_root_item { struct btrfs_inode_item inode; __le64 generation; __le64 root_dirid; __le64 bytenr; __le64 byte_limit; __le64 bytes_used; __le64 last_snapshot; __le64 flags; __le32 refs; struct btrfs_disk_key drop_progress; __u8 drop_level; __*/ struct v4l2_rect src; struct v4l2_rect dst; __u32 src_width; __u32 src_height; }; #define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame) /* Select the passthrough mode (if the argument is non-zero). In the passthrough mode the output of the encoder is passed immediately into the decoder. */ #define IVTV_IOC_PASSTHROUGH_MODE _IOW ('V', BASE_VIDIOC_PRIVATE+1, int) /* Deprecated defines: applications should use the defines from videodev2.h */ #define IVTV_SLICED_TYPE_TELETEXT_B V4L2_MPEG_ddress of the first mapped page in a range. */ __u64 vaddr; /* OUT parameters */ /* The offset that was used in the initial mmap() operation. */ __u64 offset; /* The number of pages mapped in the VM area that begins at @vaddr. */ __u32 count; __u32 pad; }; /* * Sets the maximum number of grants that may mapped at once by this gntdev * instance. * * N.B. This must be called before any other ioctl is performed on the device. */ #define IOCTL_GNTDEV_SET_MAX_GRANTS \ _IOC(_IOC_NONE, 'G', 3, sizeof(struct ioctl_gntdev_set_mne REGULATOR_EVENT_WARN_MASK 0x1E000 struct reg_genl_event { char reg_name[32]; __u64 event; }; /* attributes of reg_genl_family */ enum { REG_GENL_ATTR_UNSPEC, REG_GENL_ATTR_EVENT, /* reg event info needed by user space */ __REG_GENL_ATTR_MAX, }; #define REG_GENL_ATTR_MAX (__REG_GENL_ATTR_MAX - 1) /* commands supported by the reg_genl_family */ enum { REG_GENL_CMD_UNSPEC, REG_GENL_CMD_EVENT, /* kernel->user notifications for reg events */ __REG_GENL_CMD_MAX, }; #define REG_GENL_CMD_MAX (__REG_GENL_CMD_MAX - 1) #defi __u64 result; __u64 count; }; /** * struct sgx_enclave_remove_pages - %SGX_IOC_ENCLAVE_REMOVE_PAGES parameters * @offset: starting page offset (page aligned relative to enclave base * address defined in SECS) * @length: length of memory (multiple of the page size) * @count: (output) bytes successfully changed (multiple of page size) * * Regular (PT_REG) or TCS (PT_TCS) can be removed from an initialized * enclave if the system supports SGX2. First, the %SGX_IOC_ENCLAVE_MODIFY_TYPES * ioctl() should be used to change thHSMP_GET_RAPL_PACKAGE_COUNTER, /* 32h Get package energy counter value */ HSMP_MSG_ID_MAX, }; struct hsmp_message { __u32 msg_id; /* Message ID */ __u16 num_args; /* Number of input argument words in message */ __u16 response_sz; /* Number of expected output/response words */ __u32 args[HSMP_MAX_MSG_LEN]; /* argument/response buffer */ __u16 sock_ind; /* socket number */ }; enum hsmp_msg_type { HSMP_RSVD = -1, HSMP_SET = 0, HSMP_GET = 1, HSMP_SET_GET = 2, }; enum hsmp_proto_versions { HSMP_PROTO_VER2 = 2, HSMP; __u64 efer; __u64 apic_base; __u64 flags; __u64 pdptrs[4]; }; #define KVM_SREGS2_FLAGS_PDPTRS_VALID 1 /* for KVM_GET_FPU and KVM_SET_FPU */ struct kvm_fpu { __u8 fpr[8][16]; __u16 fcw; __u16 fsw; __u8 ftwx; /* in fxsave format */ __u8 pad1; __u16 last_opcode; __u64 last_ip; __u64 last_dp; __u8 xmm[16][16]; __u32 mxcsr; __u32 pad2; }; struct kvm_msr_entry { __u32 index; __u32 reserved; __u64 data; }; /* for KVM_GET_MSRS and KVM_SET_MSRS */ struct kvm_msrs { __u32 nmsrs; /* number of msrs in entries */ _; unsigned long ss; /* top of stack page */ }; #endif /* !__i386__ */ #endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_PTRACE_H */ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_X86_POSIX_TYPES_64_H #define _ASM_X86_POSIX_TYPES_64_H /* * This file is generally used by user-level software, so you need to * be a little careful about namespace pollution etc. Also, we cannot * assume GCC is being used. */ typedef unsigned short __kernel_old_uid_t; typedef unsigned short __kernel_old_gid_t; #definble_kernel; __u8 min_alignment; __u16 xloadflags; __u32 cmdline_size; __u32 hardware_subarch; __u64 hardware_subarch_data; __u32 payload_offset; __u32 payload_length; __u64 setup_data; __u64 pref_address; __u32 init_size; __u32 handover_offset; __u32 kernel_info_offset; } __attribute__((packed)); struct sys_desc_table { __u16 length; __u8 table[14]; }; /* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */ struct olpc_ofw_header { __u32 ofw_magic; /* OFW signature */ __u32 ofw_version; __u32 cif_handlerev2 (__X32_SYSCALL_BIT + 547) #endif /* _ASM_UNISTD_X32_H */ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_X86_SEMBUF_H #define _ASM_X86_SEMBUF_H #include /* * The semid64_ds structure for x86 architecture. * Note extra padding because this structure is passed back and forth * between kernel and user space. * * Pad space is left for: * - 2 miscellaneous 32-bit values * * x86_64 and x32 incorrectly added padding here, so the structures * are still incompatible with the paddinXIT_TRACE "kvm:kvm_exit" #define KVM_EXIT_REASON "exit_reason" #endif /* _ASM_X86_KVM_PERF_H */ #ifndef _ASM_UNISTD_64_H #define _ASM_UNISTD_64_H #define __NR_read 0 #define __NR_write 1 #define __NR_open 2 #define __NR_close 3 #define __NR_stat 4 #define __NR_fstat 5 #define __NR_lstat 6 #define __NR_poll 7 #define __NR_lseek 8 #define __NR_mmap 9 #define __NR_mprotect 10 #define __NR_munmap 11 #define __NR_brk 12 #define __NR_rt_sigaction 13 #define __NR_rt_sigprocmask 14 #define __NR_rt_sigreturn 15 #define __NR_ioctl 16 #defid have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA */ #ifndef _LINUX_SISFB_H_ #define _LINUX_SISFB_H_ #include #include /**********************************************/ /* PUBLIC */ /**********************************************/ /* vbflags, public (others in sis.h) */ #define CRT2_DEFAULT 0x00000001 #define CRT2_LCD e * requested property. The user is expected here to allocate memory for the * property structure and to provide a pointer to the allocated memory using the * data member. For some properties, this may be zero, in which case, the * value of the property will be saved to the value member and size will remain * zero on return. * * If size is not zero, then the IOCTL will attempt to copy the requested * property into the data member. * * The IOCTL will return -ENOENT if the VM could not be identified from the * provided VOUT - Indicates that the GEM object is * intended for scanout via the display engine. When set, kernel ensures * that the allocation is placed in a memory region compatible with the * display engine requirements. This may impose restrictions on tiling, * alignment, and memory placement to guarantee proper display functionality. * - %DRM_XE_GEM_CREATE_FLAG_NEEDS_VISIBLE_VRAM - When using VRAM as a * possible placement, ensure that the corresponding VRAM allocation * will always use the CPU accessible part oxcluded). The numbers below are defined as offset * against DRM_COMMAND_BASE and should be between [0x0, 0x60). */ #define DRM_XE_DEVICE_QUERY 0x00 #define DRM_XE_GEM_CREATE 0x01 #define DRM_XE_GEM_MMAP_OFFSET 0x02 #define DRM_XE_VM_CREATE 0x03 #define DRM_XE_VM_DESTROY 0x04 #define DRM_XE_VM_BIND 0x05 #define DRM_XE_EXEC_QUEUE_CREATE 0x06 #define DRM_XE_EXEC_QUEUE_DESTROY 0x07 #define DRM_XE_EXEC_QUEUE_GET_PROPERTY 0x08 #define DRM_XE_EXEC 0x09 #define DRM_XE_WAIT_USER_FENCE 0x0a #define DRM_XE_OBSERVATION 0x0b #definWHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #ifndef VIRTGPU_DRM_H #define VIRTGPU_DRM_H #include "drm.h" #if defined(__cplusplus) extern "C" { #endif /* Please note that modifications to all structs defined here are * subject to backwards-compatibility constraints. * * Do not use pointers, use __u64 instead for 32 bit / 64 bit user/kernel * compatibility Keep fields aligned to their size */ #define DRM_Vibility. * The size of the array should equal the total number of mipmap levels. * @shareable: Boolean whether other clients (as identified by file descriptors) * may reference this surface. * @scanout: Boolean whether the surface is intended to be used as a * scanout. * * Input data to the DRM_VMW_CREATE_SURFACE Ioctl. * Output data from the DRM_VMW_REF_SURFACE Ioctl. */ struct drm_vmw_surface_create_req { __u32 flags; __u32 format; __u32 mip_levels[DRM_VMW_MAX_SURFACE_FACES]; __u64 size_addr; __s32 shareable; __s3t drm_pvr_ioctl_destroy_vm_context_args { /** * @handle: [IN] Handle for VM context to be destroyed. */ __u32 handle; /** @_padding_4: Reserved. This field must be zeroed. */ __u32 _padding_4; }; /** * DOC: PowerVR IOCTL VM_MAP and VM_UNMAP interfaces * * The VM UAPI allows userspace to create buffer object mappings in GPU virtual address space. * * The client is responsible for managing GPU address space. It should allocate mappings within * the heaps returned by %DRM_PVR_DEV_QUERY_HEAP_INFO_GET. * * %DRM_IOCTL_Pll-note) OR MIT */ /* Copyright (c) 2023 Imagination Technologies Ltd. */ #ifndef PVR_DRM_UAPI_H #define PVR_DRM_UAPI_H #include "drm.h" #include #include #if defined(__cplusplus) extern "C" { #endif /** * DOC: PowerVR UAPI * * The PowerVR IOCTL argument structs have a few limitations in place, in * addition to the standard kernel restrictions: * * - All members must be type-aligned. * - The overall struct must be padded to 64-bit alignment. * - Explicit padding is almost always requids the host. * @rotator_enabled_mask: Bit-mask that represents which rotators are enabled. * Relevant for Gaudi3 and later. * @engine_core_interrupt_reg_addr: interrupt register address for engine core to use * in order to raise events toward FW. * @reserved_dram_size: DRAM size reserved for driver and firmware. */ struct hl_info_hw_ip_info { __u64 sram_base_address; __u64 dram_base_address; __u64 dram_size; __u32 sram_size; __u32 num_of_events; __u32 device_id; _ 2) #define HL_NOTIFIER_EVENT_CS_TIMEOUT (1ULL << 3) #define HL_NOTIFIER_EVENT_DEVICE_UNAVAILABLE (1ULL << 4) #define HL_NOTIFIER_EVENT_USER_ENGINE_ERR (1ULL << 5) #define HL_NOTIFIER_EVENT_GENERAL_HW_ERR (1ULL << 6) #define HL_NOTIFIER_EVENT_RAZWI (1ULL << 7) #define HL_NOTIFIER_EVENT_PAGE_FAULT (1ULL << 8) #define HL_NOTIFIER_EVENT_CRITICL_HW_ERR (1ULL << 9) #define HL_NOTIFIER_EVENT_CRITICL_FW_ERR (1ULL << 10) /* Opcode for management ioctl * * HW_IP_INFO - Receive information about different IP blocks in the re needed, status returned in 'retained' */ #define MSM_MADV_DONTNEED 1 /* backing pages not needed */ #define __MSM_MADV_PURGED 2 /* internal state */ struct drm_msm_gem_madvise { __u32 handle; /* in, GEM handle */ __u32 madv; /* in, MSM_MADV_x */ __u32 retained; /* out, whether backing store still exists */ }; /* * Draw queues allow the user to set specific submission parameter. Command * submissions specify a specific submitqueue to use. ID 0 is reserved for * backwards compatibility g header). * * This struct is a header for events written back to user-space on the DRM FD. * A read on the DRM FD will always only return complete events: e.g. if the * read buffer is 100 bytes large and there are two 64 byte events pending, * only one will be returned. * * Event types 0 - 0x7fffffff are generic DRM events, 0x80000000 and * up are chipset specific. Generic DRM events include &DRM_EVENT_VBLANK, * &DRM_EVENT_FLIP_COMPLETE and &DRM_EVENT_CRTC_SEQUENCE. */ struct drm_event { __u32 type; __u32 length; }; // __u32 pad; }; /* The normal way to synchronize with the GPU is just to CPU_PREP on * a buffer if you need to access it from the CPU (other cmdstream * submission from same or other contexts, PAGE_FLIP ioctl, etc, all * handle the required synchronization under the hood). This ioctl * mainly just exists as a way to implement the gallium pipe_fence * APIs without requiring a dummy bo to synchronize on. */ #define ETNA_WAIT_NONBLOCK 0x01 struct drm_etnaviv_wait_fence { __u32 pipe; /* in */ __u32 fence; GPL-2.0 WITH Linux-syscall-note */ /* * Copyright (C) 2015 Etnaviv Project * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have MDGPU_IDS_FLAGS_MODE_PT 0x2 /* indicate if acceleration can be working */ #define AMDGPU_INFO_ACCEL_WORKING 0x00 /* get the crtc_id from the mode object id? */ #define AMDGPU_INFO_CRTC_FROM_ID 0x01 /* query hw IP info */ #define AMDGPU_INFO_HW_IP_INFO 0x02 /* query hw IP instance count for the specified type */ #define AMDGPU_INFO_HW_IP_COUNT 0x03 /* timestamp for GL_ARB_timer_query */ #define AMDGPU_INFO_TIMESTAMP 0x05 /* Query the firmware version */ #define AMDGPU_INFO_FW_VERSION 0x0e /* Subquery id: Query VCEN_MCLK 3 #define AMDGPU_CTX_STABLE_PSTATE_PEAK 4 struct drm_amdgpu_ctx_in { /** AMDGPU_CTX_OP_* */ __u32 op; /** Flags */ __u32 flags; __u32 ctx_id; /** AMDGPU_CTX_PRIORITY_* */ __s32 priority; }; union drm_amdgpu_ctx_out { struct { __u32 ctx_id; __u32 _pad; } alloc; struct { /** For future use, no flags defined so far */ __u64 flags; /** Number of resets caused by this context so far. */ __u32 hangs; /** Reset status since the last call of the ioctl. */ __u32 reset_status; } state; stMaximum number of tilers that can be used by tiler jobs * across CS queues bound to this group. * * Must be less or equal to the number of bits set in @tiler_core_mask. */ __u8 max_tiler_cores; /** @priority: Group priority (see enum drm_panthor_group_priority). */ __u8 priority; /** @pad: Padding field, MBZ. */ __u32 pad; /** * @compute_core_mask: Mask encoding cores that can be used for compute jobs. * * This field must have at least @max_compute_cores bits set. * * The bits set here should also be set data to/from the device */ DRM_PANTHOR_BO_SYNC, /** * @DRM_PANTHOR_BO_QUERY_INFO: Query information about a BO. * * This is useful for imported BOs. */ DRM_PANTHOR_BO_QUERY_INFO, }; /** * DOC: IOCTL arguments */ /** * struct drm_panthor_obj_array - Object array. * * This object is used to pass an array of objects whose size is subject to changes in * future versions of the driver. In order to support this mutability, we pass a stride * describing the size of the object as known by userspace. * * You shouldn'size: Size of the user buffer. In case of older userspace, this may * be less than sizeof(struct drm_asahi_params_global). The kernel will * not write past the length specified here, allowing extensibility. */ __u64 size; }; /** * struct drm_asahi_vm_create - Arguments passed to DRM_IOCTL_ASAHI_VM_CREATE */ struct drm_asahi_vm_create { /** * @kernel_start: Start of the kernel-reserved address range. See * drm_asahi_params_global::vm_kernel_min_size. * * Both @kernel_start and @kernel_end must be within the range Information to be passed from userspace */ struct hdr_output_metadata { /** * @metadata_type: Static_Metadata_Descriptor_ID. */ __u32 metadata_type; /** * @hdmi_metadata_type1: HDR Metadata Infoframe. */ union { struct hdr_metadata_infoframe hdmi_metadata_type1; }; }; /** * DRM_MODE_PAGE_FLIP_EVENT * * Request that the kernel sends back a vblank event (see * struct drm_event_vblank) with the &DRM_EVENT_FLIP_COMPLETE type when the * page-flip is done. * * When used with atomic uAPI, one event will be deliver_size; /** @count_format_types: Number of formats. */ __u32 count_format_types; /** * @format_type_ptr: Pointer to ``__u32`` array of formats that are * supported by the plane. These formats do not require modifiers. */ __u64 format_type_ptr; }; struct drm_mode_get_plane_res { __u64 plane_id_ptr; __u32 count_planes; }; #define DRM_MODE_ENCODER_NONE 0 #define DRM_MODE_ENCODER_DAC 1 #define DRM_MODE_ENCODER_TMDS 2 #define DRM_MODE_ENCODER_LVDS 3 #define DRM_MODE_ENCODER_TVDAC 4 #define DRM_MODE_ENCODER_VIRTUAL 5 #definND_BASE + DRM_NOVA_GEM_INFO, struct drm_nova_gem_info), }; #if defined(__cplusplus) } #endif #endif /* __NOVA_DRM_H__ */ /* * Copyright 2005 Stephane Marchesin. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the So configurations of struct amdxdna_cu_config. */ struct amdxdna_hwctx_param_config_cu { __u16 num_cus; __u16 pad[3]; struct amdxdna_cu_config cu_configs[] __counted_by(num_cus); }; enum amdxdna_drm_config_hwctx_param { DRM_AMDXDNA_HWCTX_CONFIG_CU, DRM_AMDXDNA_HWCTX_ASSIGN_DBG_BUF, DRM_AMDXDNA_HWCTX_REMOVE_DBG_BUF, }; /** * struct amdxdna_drm_config_hwctx - Configure hardware context. * @handle: hardware context handle. * @param_type: Value in enum amdxdna_drm_config_hwctx_param. Specifies the * structure paM_IOCTL_I915_GEM_MMAP_GTT` is an older supported alias to this struct, but will behave * as setting the &extensions to 0, and &flags to `I915_MMAP_OFFSET_GTT`. */ struct drm_i915_gem_mmap_offset { /** @handle: Handle for the object being mapped. */ __u32 handle; /** @pad: Must be zero */ __u32 pad; /** * @offset: The fake offset to use for subsequent mmap call * * This is a fixed-size type for 32/64 compatibility. */ __u64 offset; /** * @flags: Flags for extended behaviour. * * It is mandatory that one of th, /* * Cached in all GPU caches available on the platform. * Coherency between CPU and GPU accesses to the surface is not * guaranteed without extra synchronization. */ I915_MOCS_CACHED, }; /** * enum drm_i915_gem_engine_class - uapi engine type enumeration * * Different engines serve different roles, and there may be more than one * engine serving each role. This enum provides a classification of the role * of the engine, which may be used when requesting operations to be performed * on a certain subset of enginebject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHERalloc_t; typedef struct drm_radeon_surface_free { unsigned int address; } drm_radeon_surface_free_t; #define DRM_RADEON_VBLANK_CRTC1 1 #define DRM_RADEON_VBLANK_CRTC2 2 /* * Kernel modesetting world below. */ #define RADEON_GEM_DOMAIN_CPU 0x1 #define RADEON_GEM_DOMAIN_GTT 0x2 #define RADEON_GEM_DOMAIN_VRAM 0x4 struct drm_radeon_gem_info { __u64 gart_size; __u64 vram_size; __u64 vram_visible; }; #define RADEON_GEM_NO_BACKING_STORE (1 << 0) #define RADEON_GEM_GTT_UC (1 << 1) #define RADEON_GEM_GTT_WC (1 << 2) /* BO ne DRM_IOCTL_EXYNOS_IPP_COMMIT DRM_IOWR(DRM_COMMAND_BASE + \ DRM_EXYNOS_IPP_COMMIT, struct drm_exynos_ioctl_ipp_commit) /* Exynos specific events */ #define DRM_EXYNOS_G2D_EVENT 0x80000000 #define DRM_EXYNOS_IPP_EVENT 0x80000002 struct drm_exynos_g2d_event { struct drm_event base; __u64 user_data; __u32 tv_sec; __u32 tv_usec; __u32 cmdlist_no; __u32 reserved; }; struct drm_exynos_ipp_event { struct drm_event base; __u64 user_data; __u32 tv_sec; __u32 tv_usec; __u32 ipp_id; __u32 sequence; __* This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #ifndef _EXYNOS_DRM_H_ #define _EXYNOS_DRM_H_ #include "drm.h" #if defined(__cplusplus) extern "C" { #endif /** * User-desired buffer creation information structure. * * @size: user-desired memory allocation size. * - this size value would be page-aligned internally. ndle; __u32 pad; __u64 timeout_ns; }; /** * struct drm_v3d_create_bo - ioctl argument for creating V3D BOs. * * There are currently no values for the flags argument, but it may be * used in a future extension. */ struct drm_v3d_create_bo { __u32 size; __u32 flags; /** Returned GEM handle for the BO. */ __u32 handle; /** * Returned offset for the BO in the V3D address space. This offset * is private to the DRM fd and is valid for the lifetime of the GEM * handle. * * This offset value will always be nonzero, s. This is passed as the number of lines * of column width in the modifier (we can't use the stride value due * to various core checks that look at it , so you should set the * stride to width*cpp). * * Note that the column height for this format modifier is the same * for all of the planes, assuming that each column contains both Y * and UV. Some SAND-using hardware stores UV in a separate tiled * image from Y to reduce the column height, which is not supported * with these modifiers. * * The DRM_FORMAT_MOD_BROADCOM_SAible GEM objects. The * main surface pitch is required to be a multiple of four Tile 4 widths. The * clear color is stored at plane index 1 and the pitch should be 64 bytes * aligned. The format of the 256 bits of clear color data matches the one used * for the I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC modifier, see its description * for details. */ #define I915_FORMAT_MOD_4_TILED_DG2_RC_CCS_CC fourcc_mod_code(INTEL, 12) /* * Intel Color Control Surfaces (CCS) for display ver. 14 render compression. * * The main surface is fier: MIT */ /* * Copyright 2011 Intel Corporation */ #ifndef DRM_FOURCC_H #define DRM_FOURCC_H #include "drm.h" #if defined(__cplusplus) extern "C" { #endif /** * DOC: overview * * In the DRM subsystem, framebuffer pixel formats are described using the * fourcc codes defined in `include/uapi/drm/drm_fourcc.h`. In addition to the * fourcc code, a Format Modifier may optionally be provided, in order to * further describe the buffer's format - for example tiling or compression. * * Format Modifiers * ---------------- /* parameter or relative offset */ }; #define FC_FRAME_HEADER_LEN 24 /* expected length of structure */ #define FC_MAX_PAYLOAD 2112U /* max payload length in bytes */ #define FC_MIN_MAX_PAYLOAD 256U /* lower limit on max payload */ #define FC_MAX_FRAME (FC_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) #define FC_MIN_MAX_FRAME (FC_MIN_MAX_PAYLOAD + FC_FRAME_HEADER_LEN) /* * fh_r_ctl - Routing control definitions. */ /* * FC-4 device_data. */ enum fc_rctl { FC_RCTL_DD_UNCAT = 0x00, /* uncategorized information */ FC_RC; /* payload length */ }; /* * ELS_ADISC payload */ struct fc_els_adisc { __u8 adisc_cmd; __u8 adisc_resv[3]; __u8 adisc_resv1; __u8 adisc_hard_addr[3]; __be64 adisc_wwpn; __be64 adisc_wwnn; __u8 adisc_resv2; __u8 adisc_port_id[3]; } __attribute__((__packed__)); /* * ELS_LOGO - process or fabric logout. */ struct fc_els_logo { __u8 fl_cmd; /* command code */ __u8 fl_zero[3]; /* specified as zero - part of cmd */ __u8 fl_resvd; /* reserved */ _req; }; struct ufs_rpmb_reply { struct ufs_bsg_reply bsg_reply; struct ufs_ehs ehs_rsp; }; #endif /* UFS_BSG_H */ /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ /* * FC Transport BSG Interface * * Copyright (C) 2008 James Smart, Emulex Corporation */ #ifndef SCSI_BSG_FC_H #define SCSI_BSG_FC_H #include /* * This file intended to be